Pony Canyon (manufactured by Good Smile Company) is going to release the Nendoroid No.268-b Akaza Akari ( 赤座 あかり ) action figure from the manga/anime “Yuru Yuri” ( ゆるゆり ). Will be bundled with the “YURUYURI 1st.Series Best Album YuruYurhythm First Release Limited Edition” ( YURUYURI♪1St.Series BestAlbum ゆるゆりずむ♪初回限定 ). Will be released on June 05, …
Berserk – Guts Band of the Hawk Ver. figma 187 action figure by Max Factory
Max Factory is going to release the figma 187 Guts ( ガッツ ) Band of the Hawk Ver. ( 鷹の団ver. ) action from the manga/anime “Berserk” ( ベルセルク ). Will be released in July 2013. Around 165mm tall, 3,620 yen.
Masterpiece of OKAMA– Skipping Rope Maid-san Shamp Mile-stone Limited edition 1/8 PVC figure by Funny Knights
Funny Knights (Aoshima) is going to release the Masterpiece of OKAMA Skipping Rope Maid-san Shamp ( 縄跳びメイドさん しゃんぷ ) Mile-stone Limited edition ( マイルストン限定版 ) 1/8 PVC figure from the original character of OKAMA. Will be released in June 2013. Around 150mm tall, 7,800 yen. Castoffable. This post contains adult material, you need to be …
Masterpiece of OKAMA– Skipping Rope Maid-san Rop 1/8 PVC figure by Funny Knights
Funny Knights (Aoshima) is going to release the Masterpiece of OKAMA Skipping Rope Maid-san Rop ( 縄跳びメイドさん ろっぷ ) 1/8 PVC figure from the original character of OKAMA. Will be released in June 2013. Around 150mm tall, 7,800 yen. Castoffable. This post contains adult material, you need to be 18 or over to view it.
Naruto – Uzumaki Naruto X-tra 1/10 PVC figure by Tsume
Tsume is going to release the X-tra Uzumaki Naruto ( うずまきナルト ) 1/10 PVC figure from the manga/anime “Naruto” ( NARUTO—ナルト— ). Will be released in July 2013. Around 175mm x 155mm x 150 mm (with base) in size, €44.90 (taxed in). Only 3,000 pieces will be available.
Naruto – Pain X-tra 1/10 PVC figure by Tsume
Tsume is going to release the X-tra Pain ( うずまきナルト ) 1/10 PVC figure from the manga/anime “Naruto” ( NARUTO—ナルト— ). Will be released in July 2013. Around 195mm x 130mm x 110 mm (with base) in size, €44.90 (taxed in). Only 3,000 pieces will be available.
Coming Soon – March week 3, 2013:
Not many things to see this week. Shirakiin Ririchiyo by Clayz Roromiya Karuta by Clayz Fuzimori Yuu by PLUM figma Guts Band of the Hawk Ver. by Max Factory One Piece Greatdeep Collection Punk Hazard by Bandai Honda Masazumi by Toy’s works Misaki Mei by Art Spirits Little Red Riding Hood Picnic by Lechery
The 31st Prize Fair 2013 Part 14: System Service
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 13: Eikoh
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 12: FuRyu III
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 11: FuRyu II
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 10: FuRyu I
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 9: Taito
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 8: SEGA IV
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 7: SEGA III
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 6: SEGA II
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 5: SEGA I
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 4: Banpresto IV
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 3: Banpresto III
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 2: Banpresto II
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
The 31st Prize Fair 2013 Part 1: Banpresto I
The 31st Prize Fair ( 第31回プライズフェア ) was held in the JAEPO 2013 ( ジャパンアミューズメントエキスポ2013, Japan Amusement EXPO 2013) in Makuhari Messe on February 15-16, 2013. The prize items showed in this Prize Fair are going to be released in the July to September 2013.
Kotobukiya Exhibition Autumn in Akihabarakan Index:
Kotobukiya Exhibition Autumn in Akihabarakan ( コトブキヤホビー展示館 ~Autumn~ in 秋葉原館 ) was held in Kotobukiya Akihabarakan ( コトブキヤ秋葉原館 ) from October 11 – 15, 2012.
Ikkitousen Ryofu Housen Maid Ver. 1/7 PVC figure by R-Line Griffon Enterprises
R-Line Griffon Enterprises is going to re-release the Ryofu Housen ( 呂布奉先 ) Maid Ver. ( メイドver. )1/7 PVC figure from the manga/anime “Ikkitousen” ( 一騎当千 ). Will be re-released in May 2013. Around 125mm tall, 7,200 yen. This post contains adult material, you need to be 18 or over to view it.
Evangelion 2.0 You can (not) Advance – Ayanami Rei Plugsuit New Movie Ver. 1/8 PVC figure by Aizu Project
Aizu Project is going to re-release the Ayanami Rei ( 綾波レイ ) Plugsuit New Movie Ver. ( プラグスーツ 新劇場版 Ver) 1/8 PVC figure from the Neon Genesis Evangelion movie “Evangelion 2.0 You can (not) Advance” ( 新劇場版エヴァンゲリオン「破」 ). Will be re-released in April 2013. Around 110mm tall, 6,800 yen.
Daydream Collection – Female College Student Eco-chan Nighty Ver. 1/8 PVC figure by Lechery
Lechery is going to release the Daydream Collection Vol. 6 Female College Student Eco-chan ( 女子大生エコちゃん ) Nighty Ver. ( ナイティver.) 1/8 PVC figure from the Lechery original Daydream Collection series. Will be released in June 2013. Around 210mm tall, 8,000 yen. Castoffable. This post contains adult material, you need to be 18 or over …
Daydream Collection – Female College Student Eco-chan Daily Ver. 1/8 PVC figure by Lechery
Lechery is going to release the Daydream Collection Vol. 6 Female College Student Eco-chan ( 女子大生エコちゃん ) Daily Ver. ( デイリィver.) 1/8 PVC figure from the Lechery original Daydream Collection series. Will be released in June 2013. Around 210mm tall, 8,000 yen. Castoffable. This post contains adult material, you need to be 18 or over …
Touhou Project – Flandre Scarlet non-scale PVC figure by Orchidseed
Orchidseed is going to release the Flandre Scarlet ( フランドール・スカーレット ) non-scale PVC figure from the doujin danmaku shooting game series “Touhou Project” ( 東方プロジェクト ) by the circle Team Shanghai Alice ( 上海アリス幻樂団 ). Will be released in October 2013. Around 200mm tall (125mm tall without stand), 7,800 yen (taxed in).
Vocaloid 2 – Hatsune Miku Selection Nendoroid Petit trading figure by Good Smile Company
Good Smile Company is going to release the Hatsune Miku Selection ( 初音ミク セレクション ) Nendoroid Petit trading figure from the the popular singing synthesizer application “Vocaloid 2”. Will be released in September 2013. Each around 65mm tall, 572 yen each. 12 kinds in total.
Queen’s Blade – Assassin of the Fang Irma 1/8 PVC figure by Megahouse
Megahouse is going to the Excellent Model Core Assassin of the Fang Irma ( 牙の暗殺者イルマ ) 1/8 PVC figure from the visual book/anime “Queen’s Blade”. Will be released in July 2013. Around 210mm tall, 8,000 yen. Castoffable. This post contains adult material, you need to be 18 or over to view it.
One Piece – Red-Haired Shanks 1/8 PVC figure by Megahouse
Megahouse is going to release the Excellent Model P.O.P NEO-DX Red-Haired Shanks ( 赤髪のシャンクス ) 1/8 PVC figure from the long-running shonen manga/anime “One Piece” ( ワンピース ). Will be released in July 2013. Around 250mm tall, 8,000 yen.
Gintama – Hijikata Toshiro Ver. Kai 1/8 PVC by Megahouse
Megahouse is going to release the G.E.M. series Hijikata Toshiro ( 土方十四郎 ) Ver. Kai ( ver.改 ) 1/8 PVC from the manga/anime “Gintama” ( 銀魂 ). Will be released in September 2013. Around 220mm tall, 7,800 yen.
Bastard!! Destructive God of Darkness – Tia Noto Yoko 1/7 PVC figure by Griffon Enterprises
Griffon Enterprises is going to release the Tia Noto Yoko ( ティア・ノート・ヨーコ ) 1/7 PVC figure from the manga “Bastard!! Destructive God of Darkness” ( バスタード!! 暗黒の破壊神 ) by Hagiwara Kazushi. Will be released in April 2013. Around 195mm tall, 8,800 yen. Castoffable. This post contains adult material, you need to be 18 or over …
ToHeart2 – Komaki Manaka Gym Class White Swimsuit Ver. non-scale PVC figure by BEAT
BEAT (production cooperated with Q-six) is going to release the Komaki Manaka ( 小牧愛佳 ) Gym Class White Swimsuit Ver. ( 体育授業 白水着ver.) non-scale PVC figure from the eroge/OVA “ToHeart2″ published by Leaf/AQUAPLUS. Will be released in June 2013. Around 175mm tall, 6,200 yen. This post contains adult material, you need to be 18 or …
ToHeart2 – Komaki Manaka Gym Class non-scale PVC figure by BEAT
BEAT (production cooperated with Q-six) is going to release the Komaki Manaka ( 小牧愛佳 ) Gym Class ( 体育授業 ) non-scale PVC figure from the eroge/OVA “ToHeart2″ published by Leaf/AQUAPLUS. Will be released in June 2013. Around 175mm tall, 6,200 yen.
Boku wa Tomodachi ga Sukunai – Twin Pack Mikazuki Yozora & Kashiwazaki Sena non-scale PVC figure set by Phat! company
Phat! company is going to release the Twin Pack Mikazuki Yozora & Kashiwazaki Sena ( 三日月夜空&柏崎星奈 ) non-scale PVC figure set from the light novel/manga “Boku wa Tomodachi ga Sukunai” ( 僕は友達が少ない, I don’t have many friends). Will be released on August 2013. Around 90mm tall, 2,362 yen.
A Certain Scientific Railgun – Misaka Mikoto non-scale action figure by Wing
Wing is going the S.K. series Misaka Mikoto ( 御坂 美琴 ) non-scale action figure figure from the light novel/anime “A Certain Scientific Railgun” ( とある科学の超電磁砲 ). Will be released in May 2013. Around 130mm tall, 4,500 yen.
Cardfight!! Vanguard – Kai Toshiki Nendoroid No. 316 action figure by Good Smile Company
Good Smile Company is going to release the Nendoroid No. 316 Kai Toshiki ( 櫂トシキ ) action figure from the anime series “Cardfight!! Vanguard” ( カードファイト!!ヴァンガード ). Will be released in July 2013. Around 100mm tall, 3,620 yen.
Tokyo Game Show 2012 Index:
Tokyo Game Show 2012 ( 東京ゲームショウ2012 ) was held in Makuhari Messe ( 幕張メッセ ) on September 20 to 23, 2012. The first two days was “business days” while the latter two days was open to the general public.
2013 Winter Hobby Maker Product Exhibition Part 7: Orca Toys, Amiami, Platz
The “2013 Winter Hobby Maker Product Exhibition” ( 2013冬 ホビーメーカー合同商品展示会 ) was held at Akihabara Good Smile & Karaoke no Tetsujin Cafe ( 秋葉原 グッドスマイル&カラオケの鉄人カフェ) on February 14-17, 2013. It is a special event that is held twice a year after each Wonder Festival that allows wholesaler to take a careful look at upcoming products. …
2013 Winter Hobby Maker Product Exhibition Part 6: Union Creative International, Ken Elephant, Medicom Toy, Daiki Kougyou
The “2013 Winter Hobby Maker Product Exhibition” ( 2013冬 ホビーメーカー合同商品展示会 ) was held at Akihabara Good Smile & Karaoke no Tetsujin Cafe ( 秋葉原 グッドスマイル&カラオケの鉄人カフェ) on February 14-17, 2013. It is a special event that is held twice a year after each Wonder Festival that allows wholesaler to take a careful look at upcoming products. …
2013 Winter Hobby Maker Product Exhibition Part 5: SOL International, Megahouse, Cospa
The “2013 Winter Hobby Maker Product Exhibition” ( 2013冬 ホビーメーカー合同商品展示会 ) was held at Akihabara Good Smile & Karaoke no Tetsujin Cafe ( 秋葉原 グッドスマイル&カラオケの鉄人カフェ) on February 14-17, 2013. It is a special event that is held twice a year after each Wonder Festival that allows wholesaler to take a careful look at upcoming products. …
2013 Winter Hobby Maker Product Exhibition Part 4: WAVE
The “2013 Winter Hobby Maker Product Exhibition” ( 2013冬 ホビーメーカー合同商品展示会 ) was held at Akihabara Good Smile & Karaoke no Tetsujin Cafe ( 秋葉原 グッドスマイル&カラオケの鉄人カフェ) on February 14-17, 2013. It is a special event that is held twice a year after each Wonder Festival that allows wholesaler to take a careful look at upcoming products. …
2013 Winter Hobby Maker Product Exhibition Part 3: FREEing, Gift, Wing, Penguin Parade, Hobby Stock
The “2013 Winter Hobby Maker Product Exhibition” ( 2013冬 ホビーメーカー合同商品展示会 ) was held at Akihabara Good Smile & Karaoke no Tetsujin Cafe ( 秋葉原 グッドスマイル&カラオケの鉄人カフェ) on February 14-17, 2013. It is a special event that is held twice a year after each Wonder Festival that allows wholesaler to take a careful look at upcoming products. …
2013 Winter Hobby Maker Product Exhibition Part 2: Max Factory, Phat! company
The “2013 Winter Hobby Maker Product Exhibition” ( 2013冬 ホビーメーカー合同商品展示会 ) was held at Akihabara Good Smile & Karaoke no Tetsujin Cafe ( 秋葉原 グッドスマイル&カラオケの鉄人カフェ) on February 14-17, 2013. It is a special event that is held twice a year after each Wonder Festival that allows wholesaler to take a careful look at upcoming products. …
2013 Winter Hobby Maker Product Exhibition Part 1: Good Smile Company
The “2013 Winter Hobby Maker Product Exhibition” ( 2013冬 ホビーメーカー合同商品展示会 ) was held at Akihabara Good Smile & Karaoke no Tetsujin Cafe ( 秋葉原 グッドスマイル&カラオケの鉄人カフェ) on February 14-17, 2013. It is a special event that is held twice a year after each Wonder Festival that allows wholesaler to take a careful look at upcoming products. …
Coming Soon – March week 2, 2013:
I just noted that I only made one Coming Soon post in February due to WonFes. Color Collect Sakurasou no Pet na Kanojo by MOVIE Color Collect Sword Art Online by MOVIE Asuna by MOVIE Assassin of the Fang Irma by Megahouse Kuko by CM’s Corp. Katsuragi by CM’s Corp. Creamy Mami by CM’s Corp. …
Shining Blade – Sakuya non-scale PVC figure by Arcadia
Arcadia is going to release the Sakuya (サクヤ ) non-scale PVC figure form the “Shining” game series “Shining Blade” ( シャイニング・ブレイド ) published by SEGA. Will be released in July 2013. Around 255mm tall, 10,800 yen.
Black Rock Shooter – Chariot with Mary (Tank) Set: TV ANIMATION Ver. Nendoroid No.315 action figure by Good Smile Company
Good Smile Company is going to release the Nendoroid No.315 Chariot with Mary (Tank) Set: TV ANIMATION Ver. ( チャリオット with 戦車(メアリー)セット TV ANIMATION Ver. ) action figure from the TV anime “Black Rock Shooter” ( ブラック★ロックシューター ). Will be released in July 2013. Around 100mm tall, 5,714 yen.
Hidamari Sketch x Honeycomb – Miyako figma 184 action figure by Max Factory
Max Factory is going to release the figma 184 Miyako ( 宮子 ) action figure from the manga/anime “Hidamari Sketch x Honeycomb” ( ひだまりスケッチ×ハニカム ). Will be released in July 2013. Around 130mm tall, 3,048 yen.
Mondaiji-tachi ga Isekai Kara Kuru So Desu yo? – Black Rabbit Pink Ver. 1/7 PVC figure by Alphamax
Alphamax is going to release the Black Rabbit ( 黒ウサギ ) Pink Ver. ( ピンクver. ) 1/7 PVC figure from the light novel/anime “Mondaiji-tachi ga Isekai Kara Kuru So Desu yo?” ( 問題児たちが異世界から来るそうですよ? Problem Children are Coming from Another World, Aren’t They??). Will be released in August 2013. Around 240mm tall, (with base), 7,800 yen.
Mondaiji-tachi ga Isekai Kara Kuru So Desu yo? – Black Rabbit Blue Ver. 1/7 PVC figure by Alphamax
Alphamax is going to release the Black Rabbit ( 黒ウサギ ) Blue Ver. ( ブルーver. ) 1/7 PVC figure from the light novel/anime “Mondaiji-tachi ga Isekai Kara Kuru So Desu yo?” ( 問題児たちが異世界から来るそうですよ? Problem Children are Coming from Another World, Aren’t They??). Will be released in August 2013. Around 240mm tall, (with base), 7,800 yen.
Inu to Hasami wa Tsukaiyo – Natsuno Kirihime non-scale PVC figure by Griffon Enterprises
Griffon Enterprises is going to release the Natsuno Kirihime ( 夏野霧姫 ) non-scale PVC figure for the light novel/manga “Inu to Hasami wa Tsukaiyo” ( 犬とハサミは使いよう ). Will be released in May 2013. Around 185mm tall, 8,900 yen.
IS (Infinite Stratos) – Shenlong x Huang Lingyin Armor Girls Project non-scale action figure by Bandai
Bandai is going to release the Armor Girls Project Shenlong x Huang Lingyin ( 甲龍×凰鈴音 ) non-scale action figure from the light novel/anime “IS (Infinite Stratos)” ( IS〈インフィニット・ストラトス〉 ). Will be released in June 2013. Around 200mm tall, 8,500 yen.
One Piece – Monkey D. Luffy Battle Ver. Gomu Gomu no Red Hawk Figuarts Zero non-scale PVC figure by Bandai
Bandai is going to release the Figuarts Zero Monkey D. Luffy ( モンキー・D・ルフィ ) Battle Ver. Gomu Gomu no Red Hawk (Battle Ver. ゴムゴムの火拳銃- ) non-scale PVC figure from the long-running popular shonen manga/anime “One Piece” ( ワンピース ). Will be released in June 2013. Around 140mm tall, 3,200 yen.
Review: Fairy Tail – Natsu and Gajeel 1/8 PVC figure by Tsume
To begin, I have to give a shout out and great thanks to Figmation for providing us Natsu and Gajeel figures for this review. I have been collecting figures for quite sometime now, ranging from novelty gatchapon to high end limited run PVC and garage kits.
Persona 4 – Satonaka Chie 1/8 PVC figure by Megahouse
Megahouse is going to release the High Priestess Satonaka Chie ( 里中千枝 ) 1/8 PVC figure from the video game/anime “Persona 4″ ( ペルソナ4 ). Will be released in June 2013. Around 210mm tall, 9,870 yen (taxed in). Megatrea Shop exclusive.
Inu x Boku SS – Shirakiin Ririchiyo PureNeemo Character Series No.069 1/6 doll by AZONE
AZONE is going to release the PureNeemo Character Series No.069 Shirakiin Ririchiyo ( 白鬼院凛々蝶 ) 1/6 doll from the manga/anime “Inu x Boku SS” ( 妖狐×僕SS ). Will be released in June 2013. Around 230mm, 10,000 yen.
A Certain Scientific Railgun – Misaka Mikoto Intruder Desukedo Ver. 1/7 Polystone figure by Marubiya
Marubiya is going to release the Misaka Mikoto ( 御坂 美琴 ) Intruder Desukedo Ver. ( INTRUDER ですけど Ver. ) 1/7 Polystone figure from the light novel/anime “A Certain Scientific Railgun” ( とある科学の超電磁砲 ). Will be released in May 2013. Around 220mm tall, 13,000 yen.
Girls und Panzer – Captain Chouno Ami non-scale PVC figure & JSDF Type 10 Tank 1/144 model by PairDot/Pit-road
PairDot/Pit-road is going to release the Captain Chouno Ami ( 蝶野 亜美 一等陸尉 ) non-scale PVC figure & JSDF Type 10 Tank ( 陸上自衛隊10式戦車 ) 1/144 model from the anime “Girls und Panzer” ( ガールズ&パンツァー ). Will be released in April 2013. Chouno Ami around 95mm tall, JSDF Type 10 Tank around 65mm long, 2,800 …
Sora no Ototshimono – Astraea 1/6 PVC figure by PLUM
PLUM is going to re-release the Astraea ( アストレア ) 1/6 PVC figure from the manga/anime “Sora no Ototshimono” ( そらのおとしもの ). Will be re-released in April 2013. Around 260mm tall (included base), 9,500 yen.
Fairy Tale Figure Series – Snow White & Crow Modern Ver. 1/8 PVC figure by Lechery
Lechery is going to release the Fairy Tale Figure vol.05 Snow White & Crow ( 白雪とカラス ) Classic Ver. ( クラシックver. ) 1/8 PVC figure from the Lechery original Fairy Tale Figure Series. Will be released in May 2013, 8,000 yen. Castoffable. This post contains adult material, you need to be 18 or over to view …
Fairy Tale Figure Series – Snow White & Crow Modern Ver. 1/8 PVC figure by Lechery
Lechery is going to release the Fairy Tale Figure vol.05 Snow White & Crow ( 白雪とカラス ) Modern Ver. ( モダンver. ) 1/8 PVC figure from the Lechery original Fairy Tale Figure Series. Will be released in May 2013, 8,000 yen. Castoffable. This post contains adult material, you need to be 18 or over to view …
Witch on the Holy Night – Aozaki Tohko 1/7 PVC figure by Alter
Alter is going to release the Aozaki Tohko ( 蒼崎 橙子 ) 1/7 PVC figure from the game “Witch on the Holy Night” ( 魔法使いの夜 ) published by Type-Moon. Will be released in July 2013. Around 230mm, 8,800 yen.
Magical Girl Lyrical Nanoha The MOVIE 2nd A’s – Takamachi Nanoha Excelion Mode Ver. figma 185 action figure by Max Factory
Max Factory is going to release the figma 185 Takamachi Nanoha ( 高町 なのは ) Excelion Mode Ver. ( エクセリオンモードver. ) action figure form the anime movie “Magical Girl Lyrical Nanoha The MOVIE 2nd A’s” ( 魔法少女リリカルなのは The MOVIE 2nd A’s ). Will be released in July 2013. Around 115mm tall, 3,334 yen.
Magical Girl Lyrical Nanoha The MOVIE 2nd A’s – Fate Testarossa Blaze Form Ver. figma 186 action figure by Max Factory
Max Factory is going to release the figma 186 Fate Testarossa ( フェイト・テスタロッサ ) Blaze Form Ver. ( ブレイズフォームver. ) action figure form the anime movie “Magical Girl Lyrical Nanoha The MOVIE 2nd A’s” ( 魔法少女リリカルなのは The MOVIE 2nd A’s ). Will be released in July 2013. Around 115mm tall, 3,334 yen.
Oshioki Sweetie – Futo Shizune Revised Edition Bikini Ver. 1/6 PVC figure by A-Label
A-Label is going to release the Futo Shizune ( 風冬しずね ) Revised Edition Bikini Ver. ( 改訂版 ビキニVer. ) 1/6 PVC figure from the eroge “Oshioki Sweetie” ( オシオキSweetie~恋するお姉さんはウラハラです~ ) published by Hadashi Shoujo. Will be released in July 2013. Around 150mm tall, 9,800 yen. Castoffable. This post contains adult material, you need to be …
Senran Kagura: Portrait of the Girls – Mirai Please Pick Up Ver. 1/8 PVC figure by R-Line Griffon Enterprises
R-Line Griffon Enterprises is going to release the Mirai ( 未来 ) Please Pick Up Ver. ( ひろって下さい。ver. ) 1/8 PVC figure from the 3DS game/anime “Senran Kagura: Portrait of the Girls” ( 閃乱カグラ -少女達の真影- ). Will be released in April 2013. Around 100mm tall, 7,800 yen. This post contains adult material, you need to be 18 …
Boku wa Tomodachi ga Sukunai – Kashiwazaki Sena Dancer Ver. 1/8 PVC figure by Griffon Enterprises
Griffon Enterprises is going to release the Kashiwazaki Sena ( 柏崎星奈 ) Dancer Ver. ( 踊り子ver. ) 1/8 PVC figure from the light novel/manga “Boku wa Tomodachi ga Sukunai” ( 僕は友達が少ない, I don’t have many friends). Will be released in May 2013. Around 170mm tall, 7,600 yen.
Comic Tenma – Sumida Rumi Gutto Kuru Figure Collection Sweet 02 non-scale PVC figure by CM’s Corp.
CM’s Corp. is going to release the Gutto Kuru Figure Collection Sweet 02 Sumida Rumi ( 墨田留美 ) non-scale PVC figure the ero manga magazine “Comic Tenma” ( コミック天魔 ) June 2012 cover illustrated by “Urushihara Satoshi” ( うるし原智志 ). Will be released in May 2013. Around 210mm tall, 8,800 yen. Castoffable. This post contains …
Senran Kagura: Portrait of the Girls – Hibari Gutto Kuru Figure Collection La beaute 15 1/8 PVC figure by CM’s Corp.
CM’s Corp. is going to release the Gutto Kuru Figure Collection La beaute 15 Hibari ( 雲雀 ) 1/8 PVC figure from the 3DS game “Senran Kagura: Portrait of the Girls” ( 閃乱カグラ -少女達の真影- ). Will be released in May 2013. Around 100mm tall, 8,800 yen.
Kiseijyui Suzune – Suzune -Scarlet- 1/6 polystone figure by Q-six
Q-six is going to release the Suzune ( 鈴音 ) -Scarlet- (-緋 Scarlet-) 1/6 polystone figure from the ero manga “Kiseijyui Suzune” ( 寄性獣医 鈴音, the Parasite Docter Suzune) by Haruki ( 春輝 ). Will be release in June 2013. Around 185mm tall, 16,800 yen. This post contains adult material, you need to be 18 …
Kiseijyui Suzune – Suzune 1/6 polystone figure by Q-six
Q-six is going to release the Suzune ( 鈴音 ) 1/6 polystone figure from the ero manga “Kiseijyui Suzune” ( 寄性獣医 鈴音, the Parasite Docter Suzune) by Haruki ( 春輝 ). Will be release in June 2013. Around 185mm tall, 16,800 yen. This post contains adult material, you need to be 18 or over to …
My Little Sister Can’t Be This Cute – Aragaki Ayase Thanatos Ver. 1/8 PVC figure by Kotobukiya
Kotobukiya is going to release the Aragaki Ayase ( 新垣 あやせ ) Thanatos Ver. ( タナトス・コスver. ) 1/8 PVC figure from the light novel/manga/anime “My Little Sister Can’t Be This Cute” ( 俺の妹がこんなに可愛いわけがない ). Will be released in July 2013. Around 205mm tall, 6,800 yen.
PHANTASY STAR ONLINE Blue Burst – RAcaseal Redria Ver.APSY 1/12 plastic model kit by Kotobukiya
Kotobukiya is going to release the RAcaseal Redria ( レイキャシール:レッドリア ) Ver. APSY 1/12 plastic model kit from the online game series “PHANTASY STAR ONLINE Blue Burst” published by SEGA. Will be released in June 2013. Around 135mm tall, 3,800 yen.
IS (Infinite Stratos) – Cecilia Alcott No.314 action figure by Phat! company
Phat! company is going to release the Nendoroid No.314 Cecilia Alcott ( セシリア・オルコット ) action figure from the light novel/anime “IS (Infinite Stratos)” ( IS〈インフィニット・ストラトス〉 ). Will be released in August 2013. Around 100mm tall, 3,334 yen.
Super Danganronpa 2: Sayonara Zetsubou Gakuen – Monokuma No.313 action figure by Good Smile Company
Good Smile Company is going to release the Nendoroid No.313 Monokuma ( モノクマ ) action figure from the video game “Super Danganronpa 2: Sayonara Zetsubou Gakuen” ( スーパーダンガンロンパ2 さよなら絶望学園 ). Will be released in June 2013. Around 100mm tall, 2,858 yen.
OVER DARD original character – S.M.G. series Runa 1/12 PVC figure by Daiki Kougyou
Daiki Kougyou is going to release the S.M.G. series Runa ( 瑠奈 ) 1/12 PVC figure from the original character by OVER DARD. Will be released in August 2013. Around 55mm tall and 100mm long, 5,600 yen. This post contains adult material, you need to be 18 or over to view it.
Fate/Zero – Saber Real Action Heroes No.619 non-scale doll by Medicom Toy
Medicom Toy is going to release the Real Action Heroes No.619 Saber ( セイバー ) non-scale doll from the light novel/anime “Fate/Zero” ( フェイト/ゼロ ) , a prequel to “Fate/stay night” ( フェイト/ステイナイト ). Will be released in September 2013. Around 300mm, 20,953 yen.
Puella Magi Madoka Magica – Miki Sayaka Real Action Heroes No.620 non-scale doll by Medicom Toy
Medicom Toy is going to release the Real Action Heroes No.620 Miki Sayaka ( 美樹 さやか ) non-scale doll from the anime “Puella Magi Madoka Magica” ( 魔法少女まどか☆マギカ ). Will be released in September 2013. Around 275mm, 20,953 yen.
Sword Art Online – Asuna Bikini Style 1/8 PVC figure by ASCII Media Works
ASCII Media Works (manufactured by WAVE) is going to release the Asuna ( アスナ ) Bikini Style 1/8 PVC figure from the light novel/anime “Sword Art Online” ( ソードアート・オンライン ). Will be released in August 2013. Around 140mm tall, 7,500 yen (taxed in). Dengekiya exclusive.
Shining Blade – Misty (Mistral Nereis) 1/8 PVC figure by Kotobukiya
Kotobukiya is going to release the Misty (Mistral Nereis) ( ミスティ [ ミストラル・ネレイス]) 1/8 PVC figure form the “Shining” game series “Shining Blade” ( シャイニング・ブレイド ) published by SEGA. Will be released in July 2013. Around 240mm tall, 9,200 yen.
Touhou Project – Patchouli Knowledge Rev.TOKIAME 1/8 PVC figure by Ichijinsha
Ichijinsha (manufactured by Kotobukiya) is going to release the Patchouli Knowledge ( パチュリー・ノーレッジ ) Rev.TOKIAME 1/8 PVC figure from the doujin danmaku shooting game series “Touhou Project” ( 東方プロジェクト ) by the circle Team Shanghai Alice ( 上海アリス幻樂団 ). Will be released in July 2013. Around 190mm tall, 13,650 yen (taxed in).
Hyakka Ryouran Samurai Girls – Naoe Kanetsugu Peach Swimsuit Ver. 1/8 PVC figure by Hobby Japan
Hobby Japan (manufactured by Alter) is going to release the Naoe Kanetsugu ( 直江 兼続 ) Peach Swimsuit Ver. ( 桃色水着Ver. ) 1/8 PVC figure from the light novel/anime “Hyakka Ryouran Samurai Girls” ( 百花繚乱 ), a join project by Nitro+ and Hobby Japan. Will be released in August-September 2013. Around 140mm tall, 7,800 yen …
Haiyore! Nyaruko-san – Nyaruko Space CQC Deluxe 1/8 PVC figure by Hobby Japan
Hobby Japan (manufactured by FREEing) is going to release the Nyaruko ( ニャル子 ) Space CQC Deluxe ( 宇宙CQCデラックス ) 1/8 PVC figure from the light novel/anime “Haiyore! Nyaruko-san” ( 這いよれ!ニャル子さん ). Will be released in May 2013. Around 230mm tall, 8,800 yen (taxed in). Hobby Channel exclusive. Only 1,000 pieces will be available through …
Ah! My Goddess – Belldandy with Holy Bell 1/10 PVC figure by Max Factory
Max Factory is going to release the Belldandy with Holy Bell ( ベルダンディー with ホーリーベル ) 1/10 PVC figure from the manga/anime “Ah! My Goddess” ( ああっ女神さまっ ). Will be released in August 2013. Around 320mm tall, 18,858 yen.
Senran Kagura: Portrait of the Girls – Katsuragi 1/8 PVC figure by Phat! company
Phat! company is going to release the Katsuragi ( 葛城 ) 1/8 PVC figure from the 3DS game/anime “Senran Kagura: Portrait of the Girls” ( 閃乱カグラ -少女達の真影- ). Will be released in August 2013. Around 200mm tall, 8,381 yen.
Nitro Super Sonic – Super Sonico Bunny Ver. 1/4 PVC figure by FREEing
FREEing is going to release the Super Sonico ( すーぱーそに子 ) Bunny Ver. ( バニーVer. ) 1/4 PVC figure from the mascot of Nitroplus event “Nitro Super Sonic”. Will be released in July 2013. Around 310mm tall, 17,905 yen.
Minami-ke – Minami Haruka Nendoroid No.312 action figure by Gift
Gift is going to srelease the Nendoroid No.312 Minami Haruka ( 南 春香 ) action figure from the manga/anime “Minami-ke” ( みなみけ ). Will be released in July 2013. Around 100mm tall, 3,620 yen.
Boku wa Tomodachi ga Sukunai – Kusunoki Yukimura 1/8 PVC figure by Penguin Parade
Penguin Parade is going to release the Kusunoki Yukimura ( 楠 幸村 ) 1/8 PVC figure from the light novel/manga/anime “Boku wa Tomodachi ga Sukunai” ( 僕は友達が少ない, I don’t have many friends). Will be released in June 2013. Around 210mm tall, 8,800 yen.
Vocaloid 2 – Kagamine Rin 1/8 PVC figure by Good Smile Company
Good Smile Company is going to re-release the Kagamine Rin ( 鏡音リン ) 1/8 PVC figure from the popular singing synthesizer application “Vocaloid 2″ ( ボーカロイド 2). Will re-released in June 2013. Around 170mm tall, 5,524 yen.



















































































