Daiki Kougyou is going to release the Yamadaya’s Tenshi-san ( 山田屋の天使さん, Yamadaya’s Angel-san ) 1/12 PVC figure from the original character by Yamadaya. Will be released in April May 2011. Around 75mm tall, 3,500 yen. Castoffable.

This post contains adult material, you need to be 18 or over to view it.

You can order her here

Here comes the Yamadaya’s Tenshi-san 1/12 PVC figure, another body that you can play with your figma or Revoltech! For those who don’t know, all the 1/12 scale figures that Daiki Kougyou release since 2010 fit figma without problem.

The holes in their necks is designed for any 3mm joint. So we can just plug the figma head in without any modification. If you want to make your favorite figma character nake, you can just pick up any 1/12 figure from Daiki, swap the head and you’re done!

Of cause, you need to pick the right body and head combination. You know some figma head is really big (e.g. Lucky Star) and some are relatively small. From what I see from the Japanese figure collectors, the head size like K-ON! figma fit really well.

Yea I know, it is really interesting! This is a very good idea that Daiki have. And here is another great idea from Daiki. As you can see from this Tenshi-san , she has a pair of beautiful wings. How lovely it is if we can put this wings on the figma or revoltech right?

“Yes we can!”, you see the part in the image above? This part will comes with this Tenshi-san. With this part, you can take the wings off Tenshi-san and plug them into it and then plug it on the back of your figma and Revoltech!!! Wow, I’m getting this Tenshi-san now!!! =D

——Description from Manufacturer——

Sculpted by Yamada-ya

Continuing where Akuma-san left off, Tenshi-san is coming to you in 1/12 scale! And we didn’t just make her smaller – she has been completely remodeled and refined by Yamadaya, making this an entirely new Tenshi-san!

Download the uncensored pic here

“How to get Password” detail at download section

https://www.nekomagic.com/?p=18649