Good Smile Company is going to release the Hatsune Miku ( 初音ミク ) Harvest Moon Ver. ( 中秋明月Ver. ) 1/8 PVC figure from the popular singing synthesizer application “Vocaloid 2” ( ボーカロイド2). Will be released in November 2018. Around 220mm tall, 11,852 yen.
Fate/stay night [Unlimited Blade Works] – Saber White Dress Ver. 1/8 PVC figure by Bell Fine
Bell Fine is going to re-release the Saber ( セイバー ) White Dress Ver. ( 白ドレスVer.) 1/8 PVC figure from the visual novel/anime “Fate/stay night [Unlimited Blade Works]” ( フェイト/ステイナイト [Unlimited Blade Works]). Will be re-released in February 2018. Around 200mm tall, 14,000 yen.
KonoSuba: God’s Blessing on This Wonderful World! – Aqua 1/8 PVC figure by Bell Fine
Bell Fine is going to re-release the Aqua ( アクア ) 1/8 PVC figure from the light novel/manga/anime “KonoSuba: God’s Blessing on This Wonderful World!” ( この素晴らしい世界に祝福を! ). Will be re-released in February 2018. Around 190mm tall, 12,300 yen.
(18+) Dengeki 25th Anniversary Dengekibunko Autumn Festival 2017
Dengeki 25th Anniversary Dengekibunko Autumn Festival 2017 ( 電撃25周年記念 電撃文庫 秋の祭典2017 ) was held at Akihabara UDX & Belle Salle Akihabara ( 秋葉原UDX & ベルサール秋葉原 ) on October 01, 2017. This festival included the stage event for the works of Dengeki, cosplayers, autograph session of the light novel arthors and illustrators, and lots more! This …
The 49th Prize Fair 2017: Index
The 49th Prize Fair ( 第49回プライズフェア ) is held in Tokyo, Fukuoka, Osaka, Sapporo ( 東京/福岡/大阪/札幌 ) starting from September 06, 2017. There were 6 exhibitors this time. They were Banpresto, SEGA, Eikoh, TAITO, System Service, and FuRyu. The prize items showed in this Prize Fair will be released in January to March 2018.
Akashic Records of Bastard Magic Instructor – Rumia Tingel 1/7 PVC figure by KADOKAWA
KADOKAWA is going to release the Rumia Tingel ( ルミア=ティンジェル ) 1/7 PVC figure from the light novel/manga/anime “Akashic Records of Bastard Magic Instructor” ( ロクでなし魔術講師と禁忌教典 ). Will be released in February 2018. Figure is around 123mm tall and 213mm long, base is around 65mm tall and 100mm in diameter, 12,500 yen.
Akashic Records of Bastard Magic Instructor – Sistine Fibel 1/7 PVC figure by KADOKAWA
KADOKAWA is going to release the Sistine Fibel ( システィーナ=フィーベル ) 1/7 PVC figure from the light novel/manga/anime “Akashic Records of Bastard Magic Instructor” ( ロクでなし魔術講師と禁忌教典 ). Will be released in March 2018. Figure is around 120mm tall and 218mm long, base is around 240mm in diameter, 12,500 yen.
The IDOLM@STER Cinderella Girls – Noble Venus Nitta Minami DreamTech 1/8 PVC figure by WAVE
WAVE is going to release the DreamTech Noble Venus ( ノーブルヴィーナス ) Nitta Minami ( 新田 美波 ) 1/8 PVC figure from the mobile game/anime “The IDOLM@STER Cinderella Girls” ( アイドルマスター シンデレラガールズ ). Will be released in January 2018. Around 200mm tall, 12,800 yen.
Street Fighter – Cammy -Zero Costume- Street Fighter Bishoujo 1/7 PVC figure by Kotobukiya
Kotobukiya is going to release the Street Fighter Bishoujo Cammy ( キャミィ ) -Zero Costume- 1/7 PVC figure from the Capcom classic fighting game series “Street Fighter” ( ストリートファイター ) developed by Capcom. Will be released in March 2018. Around 255mm tall (with base), 8,500 yen.
Street Fighter – Decapre Street Fighter Bishoujo 1/7 PVC figure by Kotobukiya
Kotobukiya is going to release the Street Fighter Bishoujo Decapre ( ディカープリ ) 1/7 PVC figure from the Capcom classic fighting game series “Street Fighter” ( ストリートファイター ) developed by Capcom. Will be released in March 2018. Around 255mm tall (with base), 8,500 yen.
Fate/Extella – Nero Claudius figma 370 action figure by Max Factory
Max Factory is going to release the figma 370 Nero Claudius ( ネロ・クラウディウス ) action figure form the “Fate/stay night” series “Fate/Extella” ( フェイト/エクステラ ) published by Marvelous. Will be released in May 2018. Around 135mm tall, 7,222 yen.
Fate/Grand Order – Learning with Manga! Fate/Grand Order Collectible Figures Episode 2 by Good Smile Company
Good Smile Company is going to release the Learning with Manga! Fate/Grand Order Collectible Figures Episode 2 ( マンガで分かる!Fate/Grand Order トレーディングフィギュア 第2話 ) trading figure form the “Fate/stay night” series “Fate/Grand Order” ( フェイト/グランドオーダー ). Will be released in April 2018. Around 35mm tall, 556 yen each; 3,334 yen for a BOX of 6 pieces. …
Action Heroine Cheer Fruits – Akagi Ann OP Special Costume Ver. 1/8 PVC figure by HOBBYMAX
HOBBYMAX is going to release the Akagi Ann ( 赤来杏 ) OP Special Costume Ver. ( OP特別衣装Ver.) 1/8 PVC figure from the anime “Action Heroine Cheer Fruits” ( アクションヒロイン チアフルーツ ). Will be released in July 2018. Around 240mm tall, 11,852 yen.
(18+) Coming Soon – September week 5, 2017
We have so many prize figure news and a new Super Sonico figure this week! We haven’t have any new Super Sonico figures for quite a while. I hope this one will looks great. =] Noodle Stopper Asuna by FuRyu DXF Yotuba Tamaki, SQ Tamaki Iroha by Banpresto WCF Osomatsu-san chess, One Piece -20th Limited- …
The 49th Prize Fair 2017 Part 6: Eikoh, TAITO, System Service
The 49th Prize Fair ( 第49回プライズフェア ) is held in Tokyo, Fukuoka, Osaka, Sapporo ( 東京/福岡/大阪/札幌 ) starting from September 06, 2017. There were 6 exhibitors this time. They were Banpresto, SEGA, Eikoh, TAITO, System Service, and FuRyu. The prize items showed in this Prize Fair will be released in January to March 2018.
The 49th Prize Fair 2017 Part 5: FuRyu
The 49th Prize Fair ( 第49回プライズフェア ) is held in Tokyo, Fukuoka, Osaka, Sapporo ( 東京/福岡/大阪/札幌 ) starting from September 06, 2017. There were 6 exhibitors this time. They were Banpresto, SEGA, Eikoh, TAITO, System Service, and FuRyu. The prize items showed in this Prize Fair will be released in January to March 2018.
The 49th Prize Fair 2017 Part 4: SEGA II
The 49th Prize Fair ( 第49回プライズフェア ) is held in Tokyo, Fukuoka, Osaka, Sapporo ( 東京/福岡/大阪/札幌 ) starting from September 06, 2017. There were 6 exhibitors this time. They were Banpresto, SEGA, Eikoh, TAITO, System Service, and FuRyu. The prize items showed in this Prize Fair will be released in January to March 2018.
The 49th Prize Fair 2017 Part 3: SEGA I
The 49th Prize Fair ( 第49回プライズフェア ) is held in Tokyo, Fukuoka, Osaka, Sapporo ( 東京/福岡/大阪/札幌 ) starting from September 06, 2017. There were 6 exhibitors this time. They were Banpresto, SEGA, Eikoh, TAITO, System Service, and FuRyu. The prize items showed in this Prize Fair will be released in January to March 2018.
The 49th Prize Fair 2017 Part 2: Banpresto II
The 49th Prize Fair ( 第49回プライズフェア ) is held in Tokyo, Fukuoka, Osaka, Sapporo ( 東京/福岡/大阪/札幌 ) starting from September 06, 2017. There were 6 exhibitors this time. They were Banpresto, SEGA, Eikoh, TAITO, System Service, and FuRyu. The prize items showed in this Prize Fair will be released in January to March 2018.
The 49th Prize Fair 2017 Part 1: Banpresto I
The 49th Prize Fair ( 第49回プライズフェア ) is held in Tokyo, Fukuoka, Osaka, Sapporo ( 東京/福岡/大阪/札幌 ) starting from September 06, 2017. There were 6 exhibitors this time. They were Banpresto, SEGA, Eikoh, TAITO, System Service, and FuRyu. The prize items showed in this Prize Fair will be released in January to March 2018.
Fate/Extella – Nero Claudius Rose Vacation Ver. 1/8 PVC figure by Funny Knights (Aoshima)
Funny Knights (Aoshima) is going to release the Nero Claudius ( ネロ・クラウディウス ) Rose Vacation Ver. ( ローズ・ヴァカンスver) 1/8 PVC figure form the “Fate/stay night” series “Fate/Extella” ( フェイト/エクステラ ) published by Marvelous. Will be released in January 2018. Around 200mm tall, 9,800 yen.
Fate/Extella – Gilgamesh Gilgamesh Sanbi seyo Miwaku no Nikubi Ver. 1/8 PVC figure by Funny Knights (Aoshima)
Funny Knights (Aoshima) is going to release the Gilgamesh ( ギルガメッシュ ) Gilgamesh Sanbi seyo Miwaku no Nikubi Ver. ( 賛美せよ魅惑の肉美ver.) 1/8 PVC figure form the “Fate/stay night” series “Fate/Extella” ( フェイト/エクステラ ) published by Marvelous. Will be released in December 2017. Around 230mm tall, 9,800 yen.
Fate/Grand Order – Shielder/Mash Kyrielight Smartphone Stand non-scale PVC figure by Pulchra
Pulchra is going to release the Bishoujo Character Collection No.15 Shielder/Mash Kyrielight ( シールダー/マシュ・キリエライト ) Smartphone Stand form the “Fate/stay night” series “Fate/Grand Order” ( フェイト/グランドオーダー ). Will be released in late December 2017. Around 78mm tall, 3,500 yen.
Street Fighter V – Chui-Li S.H.Figuarts action figure by Bandai
Bandai is going to re-release the S.H.Figuarts Chui-Li ( 春麗 ) action figure from the” “Street Fighter” ( ストリートファイター ) figthing game series “Street Fighter V” ( ストリートファイターV ) developed by Capcom. Will be re-released in January 2018. Around 145mm tall, 6,000 yen.
Street Fighter V – Ryu S.H.Figuarts action figure by Bandai
Bandai is going to re-release the S.H.Figuarts Ryu ( リュウ ) action figure from the” “Street Fighter” ( ストリートファイター ) figthing game series “Street Fighter V” ( ストリートファイターV ) developed by Capcom. Will be re-released in January 2018. Around 150mm tall, 6,000 yen.
[exclusive] Love Live! Sunshine!! – Ohara Mari Birthday Figure Project 1/8 PVC figure by Kadokawa
Kadokawa is going to release the Birthday Figure Project Ohara Mari ( 小原鞠莉 ) 1/8 PVC figure from the anime “Love Live! Sunshine!!” ( ラブライブ! サンシャイン!! ). Will be released in May 2018. Around 200mm tall, 11,880 yen (taxed in). Dengekiya exclusive.
[exclusive] One Piece – Vinsmoke Reiju P.O.P “Limited Edition” 1/8 PVC figure by Megahouse
Megahouse is going to release the P.O.P “Limited Edition” Vinsmoke Reiju ( ヴィンスモーク・レイジュ ) 1/8 PVC figure from the long-running shonen manga/anime “One Piece” ( ワンピース ). Will be released in late March 2018. Around 225mm tall, 9,990 yen (taxed in). MegaTrea Shop, Premium Bandai, Jump Characters Store, Toei Animation Online Shop, and Mugiwara store …
One Piece – Charlotte Pudding Figuarts Zero non-scale PVC figure by Bandai
Bandai is going to release the Figuarts Zero Charlotte Pudding ( シャーロット・プリン ) non-scale PVC figure from the long-running popular shonen manga/anime “One Piece” ( ワンピース ). Will be released in February 2018. Around 145mm tall, 4,500 yen.
Space Battleship Yamato 2202: Warriors of Love – Mori Yuki Armor Girls Project action figure by Bandai
Bandai is going to release the Armor Girls Project Mori Yuki ( 森雪) action figure from the anime movie “Space Battleship Yamato 2202: Warriors of Love” ( 宇宙戦艦ヤマト2202 愛の戦士たち). Will be released in February 2018. Around 145mm tall, 12,800 yen.
Assault Lily – Ishikawa Aoi Ver. 2.0 St. Melkrius International School Type Assault Lily Series No.029 1/12 doll by AZONE
AZONE is going to release the Assault Lily Series No.029 Ishikawa Aoi ( 石川葵 ) Ver. 2.0 St. Melkrius International School Type (ver.2.0 (聖メルクリウスインターナショナルスクール仕様)) 1/12 doll from the AZONE original series “Assault Lily” ( アサルトリリィ ). Will be released in October 2017. Around 150mm, 9,800 yen.
Assault Lily – Custom Lily Type-G Hair Color Light Brown/Pink/Yellow Assault Lily Series No.036 1/12 doll by AZONE
AZONE is going to release the Assault Lily Series ( アサルトリリィシリーズ ) No.036 Custom Lily Type-G ( カスタムリリィ Type-G ) Hair Color Light Brown/Pink/Yellow ( 髪色:ライトブラウン/ピンク/イエロー ) 1/12 doll from the AZONE original series “Assault Lily” ( アサルトリリィ ). Will be released in October 2017. Around 150mm, 7,000 yen each.
[exclusive] Rage of Bahamut – Hatsune Miku Winter Heroine Ver. 1/8 PVC figure by Max Factory
Max Factory is going to release the Hatsune Miku ( 初音ミク ) Winter Heroine Ver. ( ウィンターヒロインVer.) 1/8 PVC figure from the game “Rage of Bahamut” ( 神撃のバハムート ) published by Cygames. Will be released in September 2018. Around 200mm tall, 16,800 yen (taxed in). Good Smile Online Shop exclusive.
Is the Order a Rabbit? – Chino Cafe Style 1/7 PVC figure by PLUM
PLUM is going to release the Chino ( チノ ) Cafe Style 1/7 PVC figure from the manga/anime “Is the Order a Rabbit?” (ご注文はうさぎですか?, Gochumon wa Usagi Desu ka? ). Will be released in December 2017. Around 210mm tall, 12,500 yen.
Hitori no Shita The Outcast – Fu Houhou 1/7 PVC figure by Emontoys
Emontoys is going to release the Fu Houhou ( 馮宝宝(フウ・ホウホウ)) 1/7 PVC figure from the Chinese web comic/anime “Hitori no Shita The Outcast” ( 一人之下 the outcast ). Will be released in May 2018. Around 310mm tall (with base), 13,800 yen.
Cardcaptor Sakura – Syaoran Li figma 369 action figure by Max Factory
Max Factory is going to release the figma 369 Syaoran Li ( 李小狼 ) action figure from the manga/anime “Cardcaptor Sakura” ( カードキャプターさくら ). Will be released in April 2018. Around 120mm tall, 6,296 yen.
Kantai Collection – Murakumo Nendoroid No.830 action figure by Good Smile Company
Good Smile Company is going to release the Nendoroid No.830 Murakumo ( 叢雲 ) action figure from the popular web game/anime “Kantai Collection” ( 艦隊これくしょん ). Will released in April 2018. Around 100mm tall, 5,370 yen.
Sword Art Online The Movie: Ordinal Scale – Asuna Ordinal Scale Ver. & Yui No.750c action figure set by Good Smile Company
Good Smile Company is going to re-release the Nendoroid No.750c Asuna ( アスナ ) Ordinal Scale Ver. & Yui ( オーディナル・スケール Ver.&ユイ ) action figure from the anime movie “Sword Art Online The Movie: Ordinal Scale” ( 劇場版 ソードアート・オンライン -オーディナル・スケール- ).Will be released in April 2018. Around 100mm tall, 4,259 yen.
Frame Arms Girl – Stylet Bare Body Cu-poche PVC action figure by Kotobukiya
Kotobukiya is going to release the Cu-poche Stylet ( スティレット ) Bare Body ( 素体 ) non-scale PVC action figure from the original series “Frame Arms Girl” ( フレームアームズ・ガール ) by Kotobukiya. Will be released in March 2018. Around 110mm tall, 5,000 yen.
Vocaloid 2 – Hatsune Miku Danboard Ver. action figure by Chara-Ani
Chara-Ani is going to release the Hatsune Miku ( 初音ミク ) Danboard Ver. ( ダンボーver.) action figure from the popular singing synthesizer application “Vocaloid 2” ( ボーカロイド2). Will be released in December 2017. Around 53mm tall, 1,852 yen.
(18+) Walkure Romanze – Celia Cumani Aintree Pink Ver. 1/6 PVC figure by DRAGON Toy
DRAGON Toy is going to release the Celia Cumani Aintree ( スィーリア・クマーニ・エイントリー ) Pink Ver. 1/6 PVC figure form the eroge/anime “Walkure Romanze” ( ワルキューレ ロマンツェ[少女騎士物語] ). Will be released in January 2018. Around 285mm tall, 18,500 yen. Castoffable. This post contains adult material, you need to be 18 or over to view it.
Shining Beach Heroines – Pairon Swimsuit Ver. non-scale PVC figure by FLARE
FLARE is going to release the Pairon ( パイロン ) Swimsuit Ver. ( 水着Ver.) non-scale PVC figure form the “Shining” game series “Shining Beach Heroines” ( シャイニング・ビーチヒロインズ ). Will be released in May 2018. Around 260mm tall, 11,800 yen.
The iDOLM@STER Cinderella Girls – Anastasia Story of Revolving Stars Ver. 1/8 PVC figure by Good Smile Company
Good Smile Company is going to release the Anastasia ( アナスタシア ) Story of Revolving Stars Ver. ( 星巡る物語Ver.) 1/8 PVC figure from the mobile game/anime “The iDOLM@STER Cinderella Girls” ( アイドルマスター シンデレラガールズ ). Will be released in August 2018. Around 200mm tall, 13,704 yen.
Love Live! Sunshine!! – Tsushima Yoshiko figma 368 action figure by Max Factory
Max Factory is going to release the figma 368 Tsushima Yoshiko ( 津島善子 ) action figure form the anime “Love Live! Sunshine!!” ( ラブライブ! サンシャイン!! ). Will be released in March 2018. Around 135mm tall, 5,833 yen.
Fate/Extella – Nero Claudius Parfom action figure by Phat! company
Phat! company is going to release the Parfom ( パルフォム ) Nero Claudius ( ネロ・クラウディウス ) action figure form the “Fate/stay night” series “Fate/Extella” ( フェイト/エクステラ ) published by Marvelous. Will be released in May 2018. Around 140mm tall, 6,300 yen.
Himouto! Umaru-chan – Umaru Nendoroid No.524 action figure by Good Smile Company
Good Smile Company is going to re-release the Nendoroid No.524 Umaru ( うまる ) action figure from the manga/anime “Himouto! Umaru-chan” ( 干物妹!うまるちゃん ). Will be re-released in February 2018. Around 100mm tall, 4,444 yen.
Himouto! Umaru-chan – Nendoroid More Face Swap Himouto! Umaru-chan by Good Smile Company
Good Smile Company is going to release the Nendoroid More Face Swap Himouto! Umaru-chan ( とりかえっこフェイス 干物妹!うまるちゃん ) face part for Nendoroid from the manga/anime “Himouto! Umaru-chan” ( 干物妹!うまるちゃん ). Will be released in February 2018. Around 40mm tall, 463 yen each, 2,778 yen for a BOX of 6 pieces. Nendoroid Umaru is NOT included.
Fate/Grand Order – Nendoroid More Learning with Manga! Fate/Grand Order Face Swap (Saber/Altria Pendragon) by Good Smile Company
Good Smile Company is going to release the Nendoroid More Learning with Manga! Fate/Grand Order Face Swap (Saber/Altria Pendragon) ( マンガで分かる!Fate/Grand Order とりかえっこフェイス(セイバー/アルトリア・ペンドラゴン)) face part for Nendoroid form the “Fate/stay night” series “Fate/Grand Order” ( フェイト/グランドオーダー ). Will be released in January 2018. Around 40mm tall, 926 yen. Nendoroid Saber/Altria Pendragon is NOT included.
Fate/Grand Order – Nendoroid More Learning with Manga! Fate/Grand Order Face Swap (Lancer/Scáthach) by Good Smile Company
Good Smile Company is going to release the Nendoroid More Learning with Manga! Fate/Grand Order Face Swap (Lancer/Scáthach) ( マンガで分かる!Fate/Grand Order とりかえっこフェイス(ランサー/スカサハ)) face part for Nendoroid form the “Fate/stay night” series “Fate/Grand Order” ( フェイト/グランドオーダー ). Will be released in January 2018. Around 40mm tall, 926 yen. Nendoroid Lancer/Scáthach is NOT included.
(18+) yapo original character – White Elf Kalmia Project 1/8 PVC figure by I.V.E
I.V.E is going to release the Kalmia Project White Elf ( ホワイトエルフ ) 1/8 PVC figure from the original character by “yapo”. Will be released in February 2018. Around 300mm long (with bow), 250mm wide, 13,800 yen. Castoffable. This post contains adult material, you need to be 18 or over to view it.
Fate/Extella – Nero Claudius & Altria Pendragon 1/7 PVC figure set by Alphamax
Alphamax is going to release the Nero Claudius & Altria Pendragon ( ネロ・クラウディウス&アルトリア・ペンドラゴン ) 1/7 PVC figure set form the “Fate/stay night” series “Fate/Extella” ( フェイト/エクステラ ) published by Marvelous. Will be released in February 2018. Nero Claudius is around 160mm tall, Arturia Pendragon is around 185mm tall. 21,600 yen.
Fate/Extella – Nero Claudius 1/7 PVC figure by Alphamax
Alphamax is going to release the Nero Claudius ( ネロ・クラウディウス ) 1/7 PVC figure form the “Fate/stay night” series “Fate/Extella” ( フェイト/エクステラ ) published by Marvelous. Will be released in February 2018. Around 160mm tall, 10,800 yen.
Fate/Extella – Altria Pendragon 1/7 PVC figure set by Alphamax
Alphamax is going to release the Altria Pendragon ( アルトリア・ペンドラゴン ) 1/7 PVC figure set form the “Fate/stay night” series “Fate/Extella” ( フェイト/エクステラ ) published by Marvelous. Will be released in February 2018. Around 185mm tall. 10,800 yen.
Saekano: How to Raise a Boring Girlfriend – Kato Megumi Hybrid Active Figure No.059 1/3 doll by AZONE
AZONE is going to release the Hybrid Active Figure No.059 Kato Megumi ( 加藤恵 ) 1/3 doll from the light novel/anime “Saekano: How to Raise a Boring Girlfriend” ( 冴えない彼女の育てかた ). Will be released in December 2017. Around 500mm, 50,000 yen.
Frame Arms Girl – Byakko non-scale plastic model kit by Kotobukiya
Kotobukiya is going to release the Frame Arms Girl ( フレームアームズ・ガール ) Byakko ( 白虎 ) non-scale plastic model kit from the Kotobukiya series “Frame Arms Girl” ( フレームアームズ・ガール ). Will be released in February 2018. Around 150mm tall, 5,500 yen. Kit is NOT pre-painted nor completed.
DC Comics – Nightwing First Release Limited Edition DC Comics Ikemen 1/7 PVC figure by Kotobukiya
Kotobukiya is going to release the DC Comics Ikemen Nightwing ( ナイトウィング ) First Release Limited Edition ( 初回生産限定パーツ付属版 ) 1/7 PVC figure from the DC Universe. Will be released in March 2018. Around 235mm tall (with base), 8,000 yen.
Touken Ranbu -Hanamaru- – Heshikiri Hasebe Uchiban Ver. ARTFX J 1/8 PVC figure by Kotobukiya
Kotobukiya is going to release the ARTFX J Heshikiri Hasebe ( へし切長谷部 ) Uchiban Ver. ( 内番ver.) 1/8 PVC figure from the anime “Touken Ranbu -Hanamaru-” ( 刀剣乱舞-花丸- ). Will be released in April 2018. Around 227mm, 9,500 yen.
[exclusive] Hatsune Miku GT project – Racing Miku 2017 Ver. 1/1 PVC figure by Amakuni (Hobby Japan)
Amakuni (Hobby Japan) is going to release the Racing Miku 2017 Ver. ( レーシングミク2017Ver. ) 1/1 PVC figure from the official mascot of Hatsune Miku GT project ( 初音ミクGTプロジェクト ). Will be released in July – August 2018. Around 250mm tall, 13,800 yen (taxed in). Hobby Japan exclusive.
Princess Principal – Ange Chozo Art Collection 1/7 PVC figure by Medicos Entertainment
Medicos Entertainment is going to release the Chozo Art Collection ( 超像Artコレクション ) Ange ( アンジェ ) 1/7 PVC figure from the anime/mobile game “Princess Principal” ( プリンセス・プリンシパル ). Will be released in March 2018. Around 300mm tall, 14,800 yen.
Fate/Grand Order – Saber/Altria Pendragon Ver.1.5 Real Action Heroes No.777 non-scale doll by Medicom Toy
Medicom Toy is going to release the Real Action Heroes No.777 Saber/Altria Pendragon ( セイバー アルトリア・ペンドラゴン ) Ver.1.5 non-scale doll form the “Fate/stay night” series “Fate/Grand Order” ( フェイト/グランドオーダー ). Will be released in February 2018. Around 270mm tall, 26,800 yen.
Girls und Panzer das Finale – Nishizumi Miho UDF No.380 1/16 PVC figure by Medicom Toy
Medicom Toy is going to release the Ultar Detail Figure No.380 ( ウルトラディテールフィギュア No.380) Nishizumi Miho ( 西住 みほ ) 1/16 PVC figure from the anime movie “Girls und Panzer das Finale” ( ガールズ&パンツァー 最終章 ). Will be released in December 2017. Around 100mm tall, 1,500 yen.
Girls und Panzer das Finale – Nishizumi Maho UDF No.381 1/16 PVC figure by Medicom Toy
Medicom Toy is going to release the Ultar Detail Figure No.381 ( ウルトラディテールフィギュア No.381) Nishizumi Maho ( 西住 まほ ) 1/16 PVC figure from the anime movie “Girls und Panzer das Finale” ( ガールズ&パンツァー 最終章 ). Will be released in December 2017. Around 100mm tall, 1,500 yen.
Girls und Panzer das Finale – Darjeeling UDF No.382 1/16 PVC figure by Medicom Toy
Medicom Toy is going to release the Ultar Detail Figure No.382 ( ウルトラディテールフィギュア No.382) Darjeeling ( ダージリン ) 1/16 PVC figure from the anime movie “Girls und Panzer das Finale” ( ガールズ&パンツァー 最終章 ). Will be released in December 2017. Around 100mm tall, 1,500 yen.
Girls und Panzer das Finale – Anchovy UDF No.383 1/16 PVC figure by Medicom Toy
Medicom Toy is going to release the Ultar Detail Figure No.383 ( ウルトラディテールフィギュア No.383) Anchovy ( アンチョビ ) 1/16 PVC figure from the anime movie “Girls und Panzer das Finale” ( ガールズ&パンツァー 最終章 ). Will be released in December 2017. Around 100mm tall, 1,500 yen.
Girls und Panzer das Finale – Mika UDF No.384 1/16 PVC figure by Medicom Toy
Medicom Toy is going to release the Ultar Detail Figure No.384 ( ウルトラディテールフィギュア No.384) Mika ( ミカ ) 1/16 PVC figure from the anime movie “Girls und Panzer das Finale” ( ガールズ&パンツァー 最終章 ). Will be released in December 2017. Around 100mm tall, 1,500 yen.
(18+) Coming Soon – September week 4, 2017
I have so many wants this week! Depending on the release date, I know I’m not able to get all of them. I’m pretty sure I’ll get Nendoroid Yunyun and I’ll try to allocate my budget to get the Gourai. =D Ichiban Kuji Fate/stay night [Heaven’s Feel] Prize A: Saber Alter by Banpresto Nightingale the …
(18+) Ikkitousen – Kanu Unchou Bunny Special 1/6 PVC figure by Orcatoys
Orcatoys is going to release the Kanu Unchou ( 關羽 雲長 ) Bunny Special ( Bunnyスペシャル ) 1/6 PVC figure from the manga/anime “Ikkitousen” ( 一騎当千 ). Will be released in February 2018. Around 330mm tall, 15,800 yen. Castoffable. This post contains adult material, you need to be 18 or over to view it.
(18+) Ikkitousen – Kanu Unchou Bunny Special Type B 1/6 PVC figure by Orcatoys
Orcatoys is going to release the Kanu Unchou ( 關羽 雲長 ) Bunny Special Type B ( BunnyスペシャルTYPE B) 1/6 PVC figure from the manga/anime “Ikkitousen” ( 一騎当千 ). Will be released in February 2018. Around 330mm tall, 15,800 yen. Castoffable. This post contains adult material, you need to be 18 or over to view …
Re:Zero – Ram 1/7 PVC figure by Pulchra
Pulchra is going to release the Ram ( ラム ) 1/7 PVC figure from the light novel/manga/anime “Re:Zero” ( Re:ゼロから始める異世界生活, Re:Zero kara Hajimeru Isekai Seikatsu). Will be released in January 2018. Around 235mm tall (with base), 13,800 yen.
[exclusive] Touhou Project – Kirisame Marisa Curiosities of Lotus Asia Ver. non-scale PVC figure by quesQ
quesQ is going to release the Kirisame Marisa ( 霧雨魔理沙 ) Curiosities of Lotus Asia Ver. ( 東方香霖堂版 ) non-scale PVC figure from the doujin danmaku shooting game series “Touhou Project” ( 東方プロジェクト ) by the circle Team Shanghai Alice ( 上海アリス幻樂団 ). Will be released in April 2017. Arund 170mm tall, 13,800 yen. Selected …
Prisoner and Paper Plane – Ca Calne [Calne Ca Prisoner and Paper Plane Ver.] non-scale PVC figure by Union Creative
Union Creative is going to re-release the Hdge technical statue No.12 Ca Calne [Calne Ca Prisoner and Paper Plane Ver.] ( シーエ・カルラ(骸音シーエ 囚人と紙飛行機ver.) ) non-scale PVC figure from the light novel “Prisoner and Paper Plane” ( 囚人と紙飛行機 ), a derivative of Hatsune Miku from “Vocaloid 2″ ( ボーカロイド2). Will be re-released in December 2017. Around …
[exclusive] One Piece – Reiju Figuarts Zero non-scale PVC figure by Bandai
Bandai is going to release the Figuarts Zero Reiju ( レイジュ ) non-scale PVC figure from the long-running popular shonen manga/anime “One Piece” ( ワンピース ). Will be released in March 2018. Around 155mm tall, 4,860 yen (taxed in). Tamashii exclusive.
[exclusive] Aikatsu! – Kurebayashi Juri Winter School Uniform Ver. S.H.Figuarts action figure by Bandai
Bandai is going to release the S.H.Figuarts Kurebayashi Juri ( 紅林珠璃 ) Winter School Uniform Ver. ( 冬制服ver.) action figure from the card game/anime “Aikatsu!” ( アイカツ! ). Will be released in March 2018. Around 130mm tall, 5,400 yen (taxed in). Tamashii exclusive.
[exclusive] Dragon Ball Super – Goku Black S.H.Figuarts action figure by Bandai
Bandai is going to release the S.H.Figuarts Goku Black ( ゴクウブラック ) action figure from the manga/anime “Dragon Ball Super” ( ドラゴンボール超 ). Will be released in March 2018. Around 140mm tall, 6,264 yen (taxed in). Tamashii exclusive.
[exclusive] Boruto: Naruto Next Generations – Uzumaki Boruto S.H.Figuarts action figure by Bandai
Bandai is going to release the S.H.Figuarts Uzumaki Boruto ( うずまきボルト ) action figure from the manga/anime “Boruto: Naruto Next Generations” ( BORUTO-ボルト- NARUTO NEXT GENERATIONS ). Will be released in March 2018. Around 130mm tall, 5,400 yen (taxed in). Tamashii exclusive.
Classroom of the Elite – Horikita Suzune Changing Clothes Ver. 1/7 PVC figure by Kadokawa
Kadokawa is going to release the Horikita Suzune ( 堀北鈴音 ) Changing Clothes Ver. ( お着替え中Ver.) 1/7 PVC figure from the light novel/anime “Classroom of the Elite” ( ようこそ実力至上主義の教室へ, Yokoso Jitsuryoku Shijo Shugi no Kyoshitsu e). Will be released in February 2018. Around 210mm tall, 13,500 yen.
Dead or Alive 5 Last Round – Marie Rose 1/5 PVC figure by Max Factory
Max Factory is going to release the Marie Rose ( マリー・ローズ ) 1/5 PVC figure from the game “Dead or Alive 5 Last Round” ( デッドオアアライブ 5 Last Round) published by Koei Tecmo. Will be released in August 2018. Around 265mm tall, 18,333 yen.
Sword Art Online The Movie: Ordinal Scale – Asada Shino Yukata Ver. Y-style 1/8 PVC figure by FREEing
FREEing is going to release the Y-style Asada Shino ( 朝田詩乃 ) Yukata Ver. ( 浴衣Ver.) 1/8 PVC figure from the anime movie “Sword Art Online The Movie: Ordinal Scale” ( 劇場版 ソードアート・オンライン -オーディナル・スケール- ). Will be released in March 2018. Around 240mm tall (with umbrella), 10,926 yen.
Kemono Friends – Kaban Nendoroid No.829 action figure by Good Smile Company
Good Smile Company is going to release the Nendoroid No.829 Kaban ( かばん ) action figure from the media franchise “Kemono Friends” ( けものフレンズ ). Will released in April 2018. Around 100mm tall, 4,167 yen.
Kemono Friends – Soft Vinyl Lucky Beast soft vinyl figure by Aquamarine
Aquamarine is going to release the Soft Vinyl Lucky Beast ( かばん ) soft vinyl figure from the media franchise “Kemono Friends” ( けものフレンズ ). Will released in December 2017. Around 115mm tall, 3,800 yen.
Knight’s & Magic – Ernesti Echavalier Nendoroid No.828 action figure by Good Smile Company
Good Smile Company is going to release the Nendoroid No.828 Ernesti Echavalier ( エルネスティ・エチェバルリア ) action figure from the light novel/manga/anime “Knight’s & Magic” ( ナイツ&マジック ). Will be released in March 2018. Around 100mm, 4,444 yen.
Touken Ranbu -ONLINE- – Juzumaru Tsunetsugu Nendoroid No.827 action figure by Orange Rouge
Orange Rouge is going to release the Nendoroid No.827 Juzumaru Tsunetsugu ( 数珠丸恒次 ) action figure from the browser game “Touken Ranbu -ONLINE-” ( 刀剣乱舞-ONLINE- ) developed by DMM & Nitro+. Will be released in April 2018. Around 100mm, 4,444 yen.
Touken Ranbu -ONLINE- – Tsurumaru Kuninaga Nendoroid No.540 action figure by Orange Rouge
Orange Rouge is going to re-release the Nendoroid No.540 Tsurumaru Kuninaga ( 鶴丸国永 ) action figure from the browser game “Touken Ranbu -ONLINE-” ( 刀剣乱舞-ONLINE- ) developed by DMM & Nitro+. Will be re-released in February 2018. Around 100mm, 4,074 yen.
[exclusive] (18+) RAITA Original Character – Kaguya Native Creators Collection 1/7 PVC figure by Second Axe
Second Axe is going to release the Native Creators Collection Kaguya ( かぐや ) 1/7 PVC figure from original character by “RAITA”. Will be release in May 2018. Around 250mm tall, 17,820 yen (taxed in). Native Online Store exclusive. This post contains adult material, you need to be 18 or over to view it.
Frame Arms Girl – Gourai -SESSION GO!!- non-scale PVC action figure by Kotobukiya
Kotobukiya is going to release the Gourai ( 轟雷 ) -SESSION GO!!- non-scale PVC figure from the Kotobukiya series “Frame Arms Girl” ( フレームアームズ・ガール ). Will be released in February 2018. Around 175mm tall, 15,000 yen.
Legend of the Galactic Heroes – Siegfried Kircheis ARTFX J 1/8 PVC figure by Kotobukiya
Kotobukiya is going to release the ARTFX J Siegfried Kircheis ( ジークフリード・キルヒアイス ) 1/8 PVC figure from the novel/manga/anime “Legend of the Galactic Heroes” ( 銀河英雄伝説, Ginga Eiyu Densetsu). Will released in March 2018. Around 245mm tall, 9,000 yen.
[Exclusive] Code Geass: Lelouch of the Rebellion R2 – CLAMP works in Lelouch & Suzaku G.E.M. series 1/8 PVC figure set by Megahouse
Megahouse is going to release the G.E.M. series CLAMP works in Lelouch & Suzaku ( CLAMP works in ルルーシュ&スザク ) 1/8 PVC figure set from the anime “Code Geass: Lelouch of the Rebellion R2” ( コードギアス 反逆のルルーシュ R2). Will be released in late March 2018. Around 240mm tall, 29,916 yen (taxed in). MegaTrea Shop , …
Please Tell Me! Galko-chan – Galko Nurse style 1/6 PVC figure by Aquamarine
Aquamarine is going to release the Galko ( ギャル子 ) Nurse style ( ナースstyle) 1/6 PVC figure from the manga/anime “Please Tell Me! Galko-chan” ( おしえて! ギャル子ちゃん, Oshiete! Galko-chan). Will released in January 2018. Around 210mm tall, 12,000 yen.
Brave Witches – Karibuchi Hikari 1/8 PVC figure by Alter
Alter is going to release the Karibuchi Hikari ( 雁淵ひかり ) 1/8 PVC figure from the World Witches series “Brave Witches” ( ブレイブウィッチーズ ). Will be released in June 2018. Around 240mm tall (with base), 15,800 yen.
Fate/Extella – Tamamo-no-Mae Tail Maid Strike Ver. non-scale PVC figure by Union Creative
Union Creative is going to release the Tamamo-no-Mae ( 玉藻の前 ) Tail Maid Strike Ver. ( テイルメイド・ストライクver.) non-scale PVC figure form the “Fate/stay night” series “Fate/Extella” ( フェイト/エクステラ ) published by Marvelous. Will be released in December 2017. Around 250mm tall, 13,800 yen.
KonoSuba: God’s Blessing on This Wonderful World! – Yunyun Nendoroid No.826 action figure by Good Smile Company
Good Smile Company is going to release the Nendoroid No.826 Yunyun ( ゆんゆん ) action figure from the light novel/manga/anime “KonoSuba: God’s Blessing on This Wonderful World!” ( この素晴らしい世界に祝福を! ). Will released in May 2018. Around 100mm tall, 4,167 yen.

























































































