Ikkitousen (Dragon Destiny) Chouun Shiryuu 1/6 After Battle Ver. GK by Alphamax

Alphamax is going to release the Ikkitousen ( 一騎当千, Dragon Destiny) Chouun Shiryuu ( 趙雲 子龍 ) 1/6 after battle version ( アフターバトルver. ) prepainted & completed cold cast garage kit. Will be released in October 2008. 13,440 yen. Continue reading »

Ikkitousen (Dragon Destiny) Kanu Unchou 1/6 After Battle Ver. GK by Alphamax

Alphamax is going to release the Ikkitousen ( 一騎当千, Dragon Destiny) Kanu Unchou ( 關羽 雲長 ) 1/6 after battle version ( アフターバトルver. ) prepainted & completed cold cast garage kit. Will be released in October 2008. 14,490 yen. Continue reading »

The Garden of sinners Ryogi Shiki Garannodou 1/7 PVC figure by Good Smile Company

Good Smile Company is going to release the Ryogi Shiki ( 両儀 式 ) Garannodou ( 伽藍の洞 ) 1/7 PVC figure from the web light noval/moive series “the Garden of sinners” ( 空の境界 ). Will be released in November 2008. Around 230mm tall, 6,500 yen. Continue reading »

Kaitou Tenshi Twin Angel Minaduki Haruka 1/8 PVC figure by Max Factory

Max Factory is going to release the Minaduki Haruka ( 水無月 遥 ) 1/8 PVC figure from the Pachinslot/OVA “Kaitou Tenshi Twin Angel” ( 快盗天使ツインエンジェル ). Will be released in December 2008. Around 200mm tall, 6,800 yen.

Continue reading »

Kaitou Tenshi Twin Angels Kannaduki Aoi 1/8 PVC figure by Max Factory

Max Factory is going to release the Kannaduki Aoi ( 神無月 葵 ) 1/8 PVC figure from the Pachinslot/OVA “Kaitou Tenshi Twin Angel” ( 快盗天使ツインエンジェル ). Will be released in December 2008. Around 200mm tall, 6,800 yen. Continue reading »

Let’s Go TG type Pleinair! Pleinair-San (With Car) non-scale PVC figure by Wafudoh Ganguten

Wafudoh Ganguten is going to release the “Let’s Go TG type Pleinair! Pleinair-San (With Car)” ( TG式プレネールで行こう! プレネールさん(と車) ) non-scale PVC figure from the illustration of Haradaya. Will be released in October 2008. Around 140mm tall, 130mm length, 9,980 yen. Continue reading »

Please Twins Onodera Karen 1/8 PVC figure by WAVE

WAVE is going to release the DreamTech Onodera Karen ( 小野寺樺恋 ) 1/8 PVC figure from the anime “Please Twins” ( おねがい☆ツインズ ). Will be released in January 2009. Around 135mm tall, 5,460 yen. Continue reading »

MMB Angel Device Raphael non-scale Action Figure by Yamato

Yamato is going to release the Raphael non-scale action figure from the MMB (Moe Moe Block; 萌え燃えブロック ) Angel Device series. Will be released in November 2008. Around 180mm tall, 5,800 yen. Castoffable. Continue reading »

Evangelion Ayanami Rei Swimsuit Ver.3 1/8 GK by Aizu Project

Aizu Project is going to release the Ayanami Rei ( 綾波レイ ) swimsuit Ver.3 ( 水着Ver.3 )1/8 garage kit from the anime “Neon Genesis Evangelion” ( 新世紀エヴァンゲリオン ). Will be released in October 2008, 12,600 yen. Two different color (black or white). Continue reading »

Yes!Precure5GoGo Ep26 review


Reviewed – by kokoda_koji

This is ep 26 review. Before discussing this ep review, I would like to talk about the TV ratio for last ep…It’s 3.9…lower than SS lowest ep ratio…When I know this I’m also shocked, but after viewing other animes’ ratio on that week, all Sundays anime are not in the top 10 list, in the top 10 list, the animes are about 4%, after Pokemon…don’t know what happen in Japan on that week… Continue reading »

Gakuen Kino Kino non-scale PVC figure from Organic

Organic is going to release the Kino ( 木乃 ) from the light novel “Gakuen Kino” ( 学園キノ ). Will be released in October 2008. Around 100mm tall, 6,090 yen.

Continue reading »

Queen’s Blade Angel of Light Nanael 1/8 PVC figure by MegaHouse

MegaHouse is going to release the Excellent Model CORE Queen’s Blade Angel of Light Nanael ( 光明の天使ナナエル )1/8 PVC figure from “Queens Blade”, a visual book for duel. Will be released in November 2008. Around 200mm tall, 5,500 yen. Continue reading »

Trigger Heart Exelica -Enhanced- Exelica Nendoroid action figure by Alchemist

Alchemist is going to release the Nendoroid Exelica ( エグゼリカ ) action figure (by Good Smile Company) bundled with the PlayStation 3 game “Trigger Heart Exelica -Enhanced-“. Will be released in winter. 12,800 yen. Continue reading »

ToHeart2 AnotherDays Nanako Nekomimi School Swimsuits Ver. 1/5 PVC figure by Kotobukiya 4-Leaves

Kotobukiya 4-Leaves is going to release the Nanako ( 菜々子 ) Nekomimi School Swimsuit Version ( ネコ耳スクール水着Ver. ) 1/5 PVC figure from the eroge/OVA “ToHeart2 AnotherDays” published by Leaf/AQUAPLUS. Will be released in November 2008. Around 290mm, 10,290 yen. Continue reading »

Tears to Tiara : Earth’s Wreath Riannon 1/8 PVC figure by Kotobukiya

Kotobukiya is going to release the Riannon ( リアンノン ) 1/8 PVC figure from the video game “Tears to Tiara : Earth’s Wreath” ( ティアーズ・トゥ・ティアラ 花冠の大地 ). Will be released in November 2008. Around 200mm tall, 7,140 yen. Continue reading »

Comic Aun Lala 1/7 PVC figure by Orchidseed

Orchidseed is going to release the Lala ( ララ・ポッポリップ・ピピルノ・ピピル・パパレッモ ) 1/7 PVC figure from the ero monthly manga “Comic Aun” ( 月刊コミック阿吽 ). Will be released in November 2008. Around 250mm tall, 7,400 yen. Fully castoffable. Continue reading »

Plawres Sanshiro Sakurahime 1/1 PVC figure by Yamato

Yamato is going to release the Creators’ Labo #017 Sakurahime ( 桜姫 ) original version ( 原作版 ) 1/1 PVC figure from the old school classic manga/anime “Plawres Sanshiro” ( プラレス3四郎 ). Will be released in Feburay 2009. Around 100mm tall, 19,800 yen. Continue reading »

Jingai Makyo Ignis non-scale PVC figure by Yamato

Yamato is going to release the Creators’ Labo #016 Ignis ( イグニス ) non-scale PVC figure from the eroge “Jingai Makyo” ( 塵骸魔京 ) published by Nitro+. Will be released in November 2008. Around 220mm tall, 7,800 yen. Castoffable. Continue reading »