Archive for the '2017/01 release' Category

[exclusive] Touken Ranbu -ONLINE- – Mikazuki Munechika Awakened Co-de Nendoroid Co-de action figure by Orange Rouge

Orange Rouge is going to release the Nendoroid Co-de Mikazuki Munechika ( 三日月宗近 ) Awakened Co-de ( 真剣必殺コーデ ) action figure from the browser game “Touken Ranbu -ONLINE-” ( 刀剣乱舞-ONLINE- ) developed by DMM & Nitro+. Will be released at Touken Ranbu -Honmaruhaku- event ( 刀剣乱舞-本丸博- ) on January 06, 2017. Around 100mm, 3,241 yen (taxed in). Touken Ranbu -Honmaruhaku- and Good Smile Online Shop exclusive. Continue reading »

[exclusive] Vocaloid 3 – Yuzuki Yukari Apron Ver. 1/8 resin cast figure by Pulchra

Pulchra is going to release the Yuzuki Yukari ( 結月ゆかり ) Apron Ver. ( 割烹着 Ver.) 1/8 resin cast figure from the popular singing synthesizer application “Vocaloid 3” ( ボーカロイド3). Will be released in January 2017. Around 190mm tall, 14,904 yen (taxed in). Pulchra exclusive. Only 300 pieces will be available. Continue reading »

Is the Order a Rabbit? – Chino 1/8 resin cast figure by Pulchra

Pulchra is going to release the Chino ( チノ ) 1/8 resin cast figure from the manga/anime “Is the Order a Rabbit?” (ご注文はうさぎですか?, Gochumon wa Usagi Desu ka? ). Will be released in January 2017. Around 211mm tall, 12,800 yen. Continue reading »

(18+) Ikkitousen – Kanu Unchou Miyawaza limited edition Ribbon Doll Collection 1/8 PVC figure by Union Creative

Union Creative is going to release the Ribbon Doll Collection ( リボンドール・コレクション ) Kanu Unchou ( 關羽 雲長 ) Miyawaza limited edition ( 宮沢模型限定版 ) 1/8 PVC figure from the manga/anime “Ikkitousen” ( 一騎当千). Will be released in late January 2017. Around 250mm tall, 17,000 yen. Castoffable.

This post contains adult material, you need to be 18 or over to view it. Continue reading »

Alignment You! You! – Toilet no Hanako-san no Tsubakiko-san Sandals Ver. Limited Edition 1/6 PVC figure by Okayama Figure Engineering

Okayama Figure Engineering (OFE) is going to release the Toilet no Hanako-san no Tsubakiko-san ( トイレの花子さんの椿子さん ) Sandals Ver. Limited Edition ( ver.サンダル/一部流通限定 ) 1/6 PVC figure from the ero manga/anime “Alignment You! You!” ( あらいめんとゆーゆー ) written by “Matsumoto Drill Kenkyuujo” ( 松本ドリル研究所 ). Will be released in January 2017. Around 140mm tall, 13,800 yen.

This post contains adult material, you need to be 18 or over to view it. Continue reading »

Daitoshokan no Hitsujikai – Kodachi Nagi 1/3 Polysresin figure by A-Toys

A-Toys is going to release the Kodachi Nagi ( 小太刀凪 ) 1/3 Polyresin figure from the eroge/anime “Daitoshokan no Hitsujikai” ( 大図書館の羊飼い ). Will be released in January 2017. Around 390mm tall, 36,000 yen. Continue reading »

High School DxD – Rias Gremory Bunny Ver. 1/6 PVC figure by Kaitendoh

Kaitendoh is going to release the Rias Gremory ( リアス・グレモリー ) Bunny Ver. ( バニーver.) 1/6 PVC figure from the light novel/manga/anime “High School DxD” ( ハイスクールD×D ). Will be released in January 2017. Around 300mm tall, 15,000 yen. Continue reading »

My Little Sister Can’t Be This Cute – Kuroneko [Goko Ruri] Ver. White 1/8 resin figure by Pulchra

Pulchra is going to release the Kuroneko [Goko Ruri] ( 黒猫 [五更瑠璃] ) Ver. White (Ver.白 ) 1/8 resin cast figure from the light novel/manga/anime “My Little Sister Can’t Be This Cute” ( 俺の妹がこんなに可愛いわけがない ). Will be released in January 2017. Around 162mm tall (with bunny ears), 12,800 yen. Continue reading »

My Little Sister Can’t Be This Cute – Kosaka Kirino Ver. Pink 1/8 resin figure by Pulchra

Pulchra is going to release the Kosaka Kirino ( 高坂桐乃 ) Ver. Pink (Ver.ピンク ) 1/8 resin cast figure from the light novel/manga/anime “My Little Sister Can’t Be This Cute” ( 俺の妹がこんなに可愛いわけがない ). Will be released in January 2017. Around 203mm tall (with bunny ears), 12,800 yen. Continue reading »

My Little Sister Can’t Be This Cute – Aragaki Ayase Ver. Black 1/8 resin figure by Pulchra

Pulchra is going to release the Aragaki Ayase ( 新垣 あやせ ) Ver. Black (Ver.黒 ) 1/8 resin cast figure from the light novel/manga/anime “My Little Sister Can’t Be This Cute” ( 俺の妹がこんなに可愛いわけがない ). Will be released in January 2017. Around 213mm tall (with bunny ears), 12,800 yen. Continue reading »

Ro-Kyu-Bu! – Mimi Balguerie Usagi-san Ver. 1/7 PVC figure by PLUM

PLUM is going to release the Mimi Balguerie ( ミミ・バルゲリー ) Usagi-san Ver. ( うさぎさんVer. ) 1/7 PVC figure form the light novel/manga/anime “Ro-Kyu-Bu!” ( ロウきゅーぶ!). Will be released in January 2017. Around 265mm tall (with base), 9,800 yen. Continue reading »

Hourou Yusha ha Kinka to Odoru – Rachel 1/8 PVC figure by New Vision Toys

New Vision Toys is going to release the Rachel ( レイチェル ) 1/8 PVC figure from the light novel “Hourou Yusha ha Kinka to Odoru” ( 放浪勇者は金貨と踊る ). Will be released in late January 2017. Around 230mm tall (with base); Base is around 230mm tall and 210mm wide. 11,800 yen. Continue reading »

(18+) Ao no Kanata no Four Rhythm – Arisaka Mashiro Dokidoki Classroom Ver. 1/7 PVC figure by QueenTed

QueenTed is going to release the Arisaka Mashiro ( 有坂真白 ) Dokidoki Classroom Ver. ( ドキドキ☆教室Ver.) 1/7 PVC figure from the visual novel/manga/anime “Ao no Kanata no Four Rhythm” ( 蒼の彼方のフォーリズム ). Will be released in January 2017. Around 245mm tall, 12,500 yen.

This post contains adult material, you need to be 18 or over to view it. Continue reading »

Super Sonico – Super Sonico 2PaiShin non-scale PVC figure by Di molto bene

Di molto bene is going to release the 2PaiShin ( にぱいしん ) Super Sonico ( すーぱーそに子 ) non-scale PVC figure from the mascot of Nitroplus event “Nitro Super Sonic” and the TV anime “SoniAni Super Sonic the Animation” ( そにアニ Super Sonic the Animation). Will be released in January 2017. Around 50mm tall, 2,980 yen. Continue reading »

Sword Art Online – Swimsuit Leafa 1/10 PVC figure by Chara-ani (Toy’s works)

Chara-ani (Toy’s works) is going to re-release the Swimsuit Leafa ( 水着リーファ ) 1/10 PVC figure from the light novel/anime “Sword Art Online” ( ソードアート・オンライン ). Will be re-released in January 2017. Around 85mm tall, 6,463 yen. Continue reading »

Sword Art Online – Asuna New wife is always Yes Pillow Ver. 1/8 PVC figure by Chara-ani (Toy’s works)

Chara-ani (Toy’s works) is going to re-release the Asuna ( アスナ ) New wife is always Yes Pillow Ver. ( 新妻はいつでもYESまくらVer. ) 1/8 PVC figure from the light novel/anime “Sword Art Online” ( ソードアート・オンライン ). Will be re-released in January 2017. Around 120mm long, 8,553 yen. Continue reading »

Nyanboard – Maneki Nyanboard trading figure by Sen-ti-nel

Sen-ti-nel is going to release the Maneki Nyanboard ( まねきニャンボー ) trading figure from “Nyanboard” ( ニャンボー ), a spin-off of the manga “Yotsuba&!” (よつばと!). Will be released on January 2017. Around 70mm tall, 650 yen each, for 5,200 yen a BOX of 8 pieces. Continue reading »

(18+) Ikkitousen – Kanu Unchou Ribbon Doll Collection 1/8 PVC figure by Union Creative

Union Creative is going to release the Ribbon Doll Collection ( リボンドール・コレクション ) Kanu Unchou ( 關羽 雲長 ) 1/8 PVC figure from the manga/anime “Ikkitousen” ( 一騎当千). Will be released in late January 2017. Around 250mm tall, 17,000 yen.
This post contains adult material, you need to be 18 or over to view it.
October 19, 2016: Updated with cast-off images.
Continue reading »

1/7123..Last »