Archive for the 'Figure News' Category

Soul Eater Maka & Soul non-scale ATBC-PVC figure by Square Enix

Square Enix is going to release the Maka Alban & Soul Eater non-scale ATVC-PVC figure from the new 2008 anime “Soul Eater” in July 2008. Around 230mm tall, 7,800 yen. Continue reading »

Ah! My Goddess Belldandy non-scale PVC figure by Toy’s Works

Toy’s Works is going to release the Belldandy non-scale PVC figure from the anime “Ah! My Goddess – Fighting Wings -” ( ああっ女神さまっ 闘う翼 ) in September 2008. Around 185mm tall, 7,400 yen. Continue reading »

Dancing Girl Nile (tanned version) 1/6 PVC figure by BEAT

BEAT is going to release the Dancing Girl Nile (tanned version) 1/6 PVC figure in July 2009. Around 165mm tall, 7,000 yen. Continue reading »

Beat Blades Haruka Takamori Haruka 1/8 PVC figure by Kotobukiya

Kotobukiya is going to release the Takamori Haruka ( 鷹守ハルカ ) 1/8 PVC figure from the eroge”Beat Blades Haruka” ( 超昂閃忍ハルカ ) in July 2008. Around 200mm tall, 5,800 yen. Continue reading »

Getsumen To Heiki Tsukishiro Mina 1/8 PVC figure by Alter

Alter is going to release the Tsukishiro Mina ( 月城ミーナ ) 1/8 PVC figure from the anime “Getsumen To Heiki Mina” ( 月面兎兵器ミーナ, Lunar Rabbit Weapon Mina ) in August 2008. Around 220mm tall, 6,300 yen. Continue reading »

Beat Blades Haruka Takamori Haruka 1/8 PVC figure by Alter

Alter is going to release the Takamori Haruka ( 鷹守ハルカ ) 1/8 PVC figure from the eroge “Beat Blades Haruka” ( 超昂閃忍ハルカ ) in September 2008. Around 200mm tall, 6,300 yen. Continue reading »

Shining Tears X Wind Houmei 1/8 PVC figure by President Japan

President Japan is going to release the Houmei 1/8 PVC figure from the anime “Shining Tears X Wind”. Will be released in July 2008. Around 145mm tall, 7,800 yen.

Continue reading »

Shining Tears X Wind Seena Kanon 1/8 PVC figure by President Japan

President Japan is going to release the Seena Kanon (椎名 夏音) 1/8 PVC figure from the anime “Shining Tears X Wind” on July 2008. Around 280mm tall, 7,800 yen. Continue reading »

Shining Tears X Wind Maple 1/1 PVC figure by President Japan

President Japan is going to release the Maple 1/1 PVC figure from the anime “Shining Tears X Wind” on July 2008. Around 382mm tall, 18,000 yen. Continue reading »

Prism Ark Sister Hell 1/7 garage kit by Aizu Project

Aizu Project is going to release the Sister Hell 1/7 prepainted & completed garage kit from the eroge/anime “Prism Ark” in June 2008. 10,500 yen. Only 20 pieces will be manufactured. Continue reading »

Ikkitousen (Dragon Destiny) Kanu Unchou 1/7 PVC figure by Uart

Uart is going to release the Kanu Unchou (関羽雲長) 1/7 PVC figure from the anime series “Ikkitousen” ( 一騎当千, Dragon Destiny) in June 2008. 7,800 yen. Continue reading »

Night Shift Nurse 3 Yagami Yuu non-scale PVC figure by Toy’s Planning

Toy’s Planning is going to re-release the Nanase Ren ( 八神優 ) non-scale PVC figure from the eroge/anime series “Night Shift Nurse 3” ( 夜勤病棟・参 ) in June 2008. Around 140mm tall, 4,000 yen.

This post contains adult material, you need to be 18 or over to view it. Continue reading »

Night Shift Nurse Nanase Ren non-scale PVC figure by Toy’s Planning

Toy’s Planning is going to re-release the Nanase Ren ( 七瀬恋 ) non-scale PVC figure from the eroge/anime series “Night Shift Nurse” ( 夜勤病棟 ) in June 2008. Around 270mm tall, 5,000 yen.

This post contains adult material, you need to be 18 or over to view it. Continue reading »

Auction Marikouji Honoka non-scale PVC figure by Toy’s Planning

Toy’s Planning is going to re-release the Marikouji Honoka ( 万里小路 穂乃華 ) non-scale PVC figure from the eroge “Auction” published by Squadrad. Will be released in June 2008. Around 140mm tall, 3,800 yen.

This post contains adult material, you need to be 18 or over to view it. Continue reading »

Please Teacher! Kazami Mizuho 1/5 garage kit by Musashiya

Musashiya is going to release the Kazami Mizuho (風見みずほ)1/5 (black version) prepainted & completed garage kit from the anime “Please Teacher!” (おねがい☆ティーチャー/ Onegai Teacher! ) in June-July 2008. Around 330mm tall, 19,800 yen. Only 200 pieces will be manufactured. Continue reading »

Martian Successor Nadesico Hoshino Ruri 1/5 garage kit by Musashiya

Musashiya is going to release the Hoshino Ruri (ホシノ・ルリ) 16 yrs old (Special 5) ’08 version prepainted & completed garage kit from the series “Martian Successor Nadesico” ( 機動戦艦ナデシコ ) in July 2008. About 330mm tall, 19,800 yen. Only 300 pieces will be manufactured. Continue reading »

Ikkitousen (Dragon Destiny) Kanu Unchou 1/6 PVC figure by OrchidSeed

OrchidSeed is going to release the Ikkitousen ( 一騎当千, Dragon Destiny) Kanu Unchou (關羽 雲長) ~Summer Vacation~ version 1/6 PVC Figure on July 2008. Around 170mm tall, 7,400 yen.

Continue reading »

Food Girls Nasubi-sama 1/6 PVC figure by Yamato

Yamato is going to release the Nasubi-sama ( ナスビ様 ) 1/6 PVC figure from the manga “Food Girls” ( フードガールズ ) in July 2008. Around 260mm tall,7,800 yen. Continue reading »