Archive for the '2008/07 release' Category

Polyphonica Corticarte Apa Lagranges 1/7 PVC figure by New Line

New Line is going to release the Corticarte Apa Lagranges 1/7 PVC figure from the visual novel “Shinkyoku Sokai Polyphonica” ( 神曲奏界ポリフォニカ ) published by Ocelot by the end of July 2008. Around 220mm tall, 7,800 yen. Continue reading »

FineScenery Type 5 Mechanization Air Foot Soldier non-scale PVC figure by Toranona

Toranona is going to release the FineScenery “Mechanization Foot Soldier” ( 機械化歩兵 ) Series “Empire of Japan Army” (大日本帝国陸軍 ) “Type 5 Mechanization Air Foot Soldier” (五式機械化航空歩兵) non-scale PVC figure in July 2008. Size unknown, 4,800 yen. Continue reading »

Soul Eater Maka & Soul non-scale ATBC-PVC figure by Square Enix

Square Enix is going to release the Maka Alban & Soul Eater non-scale ATVC-PVC figure from the new 2008 anime “Soul Eater” in July 2008. Around 230mm tall, 7,800 yen. Continue reading »

Dancing Girl Nile (tanned version) 1/6 PVC figure by BEAT

BEAT is going to release the Dancing Girl Nile (tanned version) 1/6 PVC figure in July 2009. Around 165mm tall, 7,000 yen. Continue reading »

Beat Blades Haruka Takamori Haruka 1/8 PVC figure by Kotobukiya

Kotobukiya is going to release the Takamori Haruka ( 鷹守ハルカ ) 1/8 PVC figure from the eroge”Beat Blades Haruka” ( 超昂閃忍ハルカ ) in July 2008. Around 200mm tall, 5,800 yen. Continue reading »

Shining Tears X Wind Houmei 1/8 PVC figure by President Japan

President Japan is going to release the Houmei 1/8 PVC figure from the anime “Shining Tears X Wind”. Will be released in July 2008. Around 145mm tall, 7,800 yen.

Continue reading »

Shining Tears X Wind Seena Kanon 1/8 PVC figure by President Japan

President Japan is going to release the Seena Kanon (椎名 夏音) 1/8 PVC figure from the anime “Shining Tears X Wind” on July 2008. Around 280mm tall, 7,800 yen. Continue reading »

Shining Tears X Wind Maple 1/1 PVC figure by President Japan

President Japan is going to release the Maple 1/1 PVC figure from the anime “Shining Tears X Wind” on July 2008. Around 382mm tall, 18,000 yen. Continue reading »

Please Teacher! Kazami Mizuho 1/5 garage kit by Musashiya

Musashiya is going to release the Kazami Mizuho (風見みずほ)1/5 (black version) prepainted & completed garage kit from the anime “Please Teacher!” (おねがい☆ティーチャー/ Onegai Teacher! ) in June-July 2008. Around 330mm tall, 19,800 yen. Only 200 pieces will be manufactured. Continue reading »

Martian Successor Nadesico Hoshino Ruri 1/5 garage kit by Musashiya

Musashiya is going to release the Hoshino Ruri (ホシノ・ルリ) 16 yrs old (Special 5) ’08 version prepainted & completed garage kit from the series “Martian Successor Nadesico” ( 機動戦艦ナデシコ ) in July 2008. About 330mm tall, 19,800 yen. Only 300 pieces will be manufactured. Continue reading »

Ikkitousen (Dragon Destiny) Kanu Unchou 1/6 PVC figure by OrchidSeed

OrchidSeed is going to release the Ikkitousen ( 一騎当千, Dragon Destiny) Kanu Unchou (關羽 雲長) ~Summer Vacation~ version 1/6 PVC Figure on July 2008. Around 170mm tall, 7,400 yen.

Continue reading »

Food Girls Nasubi-sama 1/6 PVC figure by Yamato

Yamato is going to release the Nasubi-sama ( ナスビ様 ) 1/6 PVC figure from the manga “Food Girls” ( フードガールズ ) in July 2008. Around 260mm tall,7,800 yen. Continue reading »

Air Gear Noyamano Ringo hentai kamen version PVC figure by Yamato

Yamato is going to release the Noyamano Ringo ( 野山野 林檎 ) hentai kamen ( 変態仮面 ) verion PVC figure from the anime “Air Gear” ( エア・ギア ) in July 2008. Around 230mm tall, 7,140 yen. Continue reading »

Sengoku Rance Suzume 1/8 PVC figure by Kotobukiya

Kotobukiya is going to release the Suzme ( 鈴女 )1/8 PVC figure from the eroge published by Alice Soft “Sengoku Rance” ( 戦国ランス ) in July 2008. Around 170mm tall, 5,775 yen. Continue reading »

Little Busters! Kamikita Komari 1/8 PVC figure by Kotobukiya

Kotobukiya is going to release Kamikita Komari (神北 小毬) 1/8 PVC figure from the eroge published by Key “Little Busters!” in July 2008. Around 100mm tall, 5,775 yen. Continue reading »

They are my noble masters Benis 1/8 PVC figure by Good Smile Company

Good Smile Company is going to release the Benis ( 朱子ベニス ) 1/8 PVC figure from the eroge/anime “They are my noble masters” ( 君が主で執事が俺で ) in July 2008. Around 220mm tall, 6,500 yen. Continue reading »

The Melancholy of Haruhi Suzumiya Asahina Mikuru 1/8 PVC figure by Max Factory

Max Factory is going to release the Asahina Mikuru ( 朝比奈みくる ) 1/8 PVC figure from the light novel “The Melancholy of Haruhi Suzumiya”( 涼宮ハルヒの憂鬱 ) in July 2008. Around 190mm tall, 5,800 yen. Continue reading »

Shakugan no Shana II Shana 1/6 PVC figure by Resinya

Resinya is going to release the Shana 1/6 PVC figure from the anime Shakugan no Shana II ( 灼眼のシャナII ) in July 2008. Around 280mm tall, 7,800 yen. A normal edition and two different limited edition available. Continue reading »

2/3123